#ifndef RAYCASTLIB_H #define RAYCASTLIB_H /** raycastlib (RCL) - Small C header-only raycasting library for embedded and low performance computers, such as Arduino. Only uses integer math and stdint standard library. Check the defines below to fine-tune accuracy vs performance! Don't forget to compile with optimizations. Before including the library define RCL_PIXEL_FUNCTION to the name of the function (with RCL_PixelFunction signature) that will render your pixels! - All public (and most private) library identifiers start with RCL_. - Game field's bottom left corner is at [0,0]. - X axis goes right in the ground plane. - Y axis goes up in the ground plane. - Height means the Z (vertical) coordinate. - Each game square is RCL_UNITS_PER_SQUARE * RCL_UNITS_PER_SQUARE points. - Angles are in RCL_Units, 0 means pointing right (x+) and positively rotates clockwise. A full angle has RCL_UNITS_PER_SQUARE RCL_Units. - Most things are normalized with RCL_UNITS_PER_SQUARE (sin, cos, vector unit length, texture coordinates etc.). - Screen coordinates are normal: [0,0] = top left, x goes right, y goes down. author: Miloslav "drummyfish" Ciz license: CC0 1.0 version: 0.1 */ #include #ifndef RCL_RAYCAST_TINY /** Turns on super efficient version of this library. Only use if neccesarry, looks ugly. Also not done yet. */ #define RCL_UNITS_PER_SQUARE 1024 /**< Number of RCL_Units in a side of a spatial square. */ typedef int32_t RCL_Unit; /**< Smallest spatial unit, there is RCL_UNITS_PER_SQUARE units in a square's length. This effectively serves the purpose of a fixed-point arithmetic. */ #define RCL_INFINITY 5000000; #else #define RCL_UNITS_PER_SQUARE 32 typedef int16_t RCL_Unit; #define RCL_INFINITY 32000; #define RCL_USE_DIST_APPROX 2 #endif #ifndef RCL_COMPUTE_WALL_TEXCOORDS #define RCL_COMPUTE_WALL_TEXCOORDS 1 #endif #ifndef RCL_COMPUTE_FLOOR_TEXCOORDS #define RCL_COMPUTE_FLOOR_TEXCOORDS 0 #endif #ifndef RCL_USE_COS_LUT #define RCL_USE_COS_LUT 0 /**< type of look up table for cos function: 0: none (compute) 1: 64 items 2: 128 items */ #endif #ifndef RCL_USE_DIST_APPROX #define RCL_USE_DIST_APPROX 0 /**< What distance approximation to use: 0: none (compute full Euclidean distance) 1: accurate approximation 2: octagonal approximation (LQ) */ #endif #ifndef RCL_TEXTURE_VERTICAL_STRETCH #define RCL_TEXTURE_VERTICAL_STRETCH 1 /**< Whether textures should be stretched to wall height (possibly slightly slower if on). */ #endif #ifndef RCL_ACCURATE_WALL_TEXTURING #define RCL_ACCURATE_WALL_TEXTURING 0 /**< If turned on, vertical wall texture coordinates will always be calculated with more precise (but slower) method, otherwise RCL_MIN_TEXTURE_STEP will be used to decide the method. */ #endif #ifndef RCL_COMPUTE_FLOOR_DEPTH #define RCL_COMPUTE_FLOOR_DEPTH 1 /**< Whether depth should be computed for floor pixels - turns this off if not needed. */ #endif #ifndef RCL_COMPUTE_CEILING_DEPTH #define RCL_COMPUTE_CEILING_DEPTH 1 /**< AS RCL_COMPUTE_FLOOR_DEPTH but for ceiling. */ #endif #ifndef RCL_ROLL_TEXTURE_COORDS #define RCL_ROLL_TEXTURE_COORDS 1 /**< Says whether rolling doors should also roll the texture coordinates along (mostly desired for doors). */ #endif #ifndef RCL_VERTICAL_FOV #define RCL_VERTICAL_FOV (RCL_UNITS_PER_SQUARE / 2) #endif #ifndef RCL_HORIZONTAL_FOV #define RCL_HORIZONTAL_FOV (RCL_UNITS_PER_SQUARE / 4) #endif #define RCL_HORIZONTAL_FOV_HALF (RCL_HORIZONTAL_FOV / 2) #ifndef RCL_CAMERA_COLL_RADIUS #define RCL_CAMERA_COLL_RADIUS RCL_UNITS_PER_SQUARE / 4 #endif #ifndef RCL_CAMERA_COLL_HEIGHT_BELOW #define RCL_CAMERA_COLL_HEIGHT_BELOW RCL_UNITS_PER_SQUARE #endif #ifndef RCL_CAMERA_COLL_HEIGHT_ABOVE #define RCL_CAMERA_COLL_HEIGHT_ABOVE (RCL_UNITS_PER_SQUARE / 3) #endif #ifndef RCL_CAMERA_COLL_STEP_HEIGHT #define RCL_CAMERA_COLL_STEP_HEIGHT (RCL_UNITS_PER_SQUARE / 2) #endif #ifndef RCL_MIN_TEXTURE_STEP #if RCL_TEXTURE_VERTICAL_STRETCH == 1 #define RCL_MIN_TEXTURE_STEP 12 /**< Specifies the minimum step in pixels that can be used to compute texture coordinates in a fast way. Smallet step should be faster (but less accurate). */ #else #define RCL_MIN_TEXTURE_STEP 24 #endif #endif #define HORIZON_DEPTH (11 * RCL_UNITS_PER_SQUARE) /**< What depth the horizon has (the floor depth is only approximated with the help of this constant). */ #ifndef RCL_VERTICAL_DEPTH_MULTIPLY #define RCL_VERTICAL_DEPTH_MULTIPLY 2 /**< Defines a multiplier of height difference when approximating floor/ceil depth. */ #endif #define RCL_min(a,b) ((a) < (b) ? (a) : (b)) #define RCL_max(a,b) ((a) > (b) ? (a) : (b)) #define RCL_nonZero(v) ((v) != 0 ? (v) : 1) ///< To prevent zero divisions. #define RCL_logV2D(v)\ printf("[%d,%d]\n",v.x,v.y); #define RCL_logRay(r){\ printf("ray:\n");\ printf(" start: ");\ RCL_logV2D(r.start);\ printf(" dir: ");\ RCL_logV2D(r.direction);}\ #define RCL_logHitResult(h){\ printf("hit:\n");\ printf(" square: ");\ RCL_logV2D(h.square);\ printf(" pos: ");\ RCL_logV2D(h.position);\ printf(" dist: %d\n", h.distance);\ printf(" dir: %d\n", h.direction);\ printf(" texcoord: %d\n", h.textureCoord);}\ #define RCL_logPixelInfo(p){\ printf("pixel:\n");\ printf(" position: ");\ RCL_logV2D(p.position);\ printf(" depth: %d\n", p.depth);\ printf(" wall: %d\n", p.isWall);\ printf(" hit: ");\ RCL_logHitResult(p.hit);\ }\ /// Position in 2D space. typedef struct { RCL_Unit x; RCL_Unit y; } RCL_Vector2D; typedef struct { RCL_Vector2D start; RCL_Vector2D direction; } RCL_Ray; typedef struct { RCL_Unit distance; /**< Distance (perpend.) to the hit position, or -1 if no collision happened. */ uint8_t direction; ///< Direction of hit. RCL_Unit textureCoord; /**< Normalized (0 to RCL_UNITS_PER_SQUARE - 1) texture coordinate (horizontal). */ RCL_Vector2D square; ///< Collided square coordinates. RCL_Vector2D position; ///< Exact collision position in RCL_Units. RCL_Unit arrayValue; /** Value returned by array function (most often this will be the floor height). */ RCL_Unit type; /**< Integer identifying type of square (number returned by type function, e.g. texture index).*/ RCL_Unit doorRoll; ///< Holds value of door roll. } RCL_HitResult; typedef struct { RCL_Vector2D position; RCL_Unit direction; RCL_Vector2D resolution; int16_t shear; /**< Shear offset in pixels (0 => no shear), can simulate looking up/down. */ RCL_Unit height; } RCL_Camera; /** Holds an information about a single rendered pixel (for a pixel function that works as a fragment shader). */ typedef struct { RCL_Vector2D position; ///< On-screen position. int8_t isWall; ///< Whether the pixel is a wall or a floor/ceiling. int8_t isFloor; ///< Whether the pixel is floor or ceiling. int8_t isHorizon; ///< If the pixel belongs to horizon segment. RCL_Unit depth; ///< Corrected depth. RCL_HitResult hit; ///< Corresponding ray hit. RCL_Vector2D texCoords; /**< Normalized (0 to RCL_UNITS_PER_SQUARE - 1) texture coordinates. */ } RCL_PixelInfo; void RCL_PIXEL_FUNCTION (RCL_PixelInfo *pixel); typedef struct { uint16_t maxHits; uint16_t maxSteps; } RCL_RayConstraints; /** Function used to retrieve some information about cells of the rendered scene. It should return a characteristic of given square as an integer (e.g. square height, texture index, ...) - between squares that return different numbers there is considered to be a collision. This function should be as fast as possible as it will typically be called very often. */ typedef RCL_Unit (*RCL_ArrayFunction)(int16_t x, int16_t y); /** Function that renders a single pixel at the display. It is handed an info about the pixel it should draw. This function should be as fast as possible as it will typically be called very often. */ typedef void (*RCL_PixelFunction)(RCL_PixelInfo *info); typedef void (*RCL_ColumnFunction)(RCL_HitResult *hits, uint16_t hitCount, uint16_t x, RCL_Ray ray); /** Simple-interface function to cast a single ray. @return The first collision result. */ RCL_HitResult RCL_castRay(RCL_Ray ray, RCL_ArrayFunction arrayFunc); /** Maps a single point in the world to the screen (2D position + depth). */ RCL_PixelInfo RCL_mapToScreen(RCL_Vector2D worldPosition, RCL_Unit height, RCL_Camera camera); /** Casts a single ray and returns a list of collisions. @param ray ray to be cast @param arrayFunc function that will be used to determine collisions (hits) with the ray (squares for which this function returns different values are considered to have a collision between them), this will typically be a function returning floor height @param typeFunc optional (can be 0) function - if provided, it will be used to mark the hit result with the number returned by this function (it can be e.g. a texture index) @param hitResults array in which the hit results will be stored (has to be preallocated with at space for at least as many hit results as maxHits specified with the constraints parameter) @param hitResultsLen in this variable the number of hit results will be returned @param constraints specifies constraints for the ray cast */ void RCL_castRayMultiHit(RCL_Ray ray, RCL_ArrayFunction arrayFunc, RCL_ArrayFunction typeFunc, RCL_HitResult *hitResults, uint16_t *hitResultsLen, RCL_RayConstraints constraints); RCL_Vector2D RCL_angleToDirection(RCL_Unit angle); /** Cos function. @param input to cos in RCL_Units (RCL_UNITS_PER_SQUARE = 2 * pi = 360 degrees) @return RCL_normalized output in RCL_Units (from -RCL_UNITS_PER_SQUARE to RCL_UNITS_PER_SQUARE) */ RCL_Unit RCL_cosInt(RCL_Unit input); RCL_Unit RCL_sinInt(RCL_Unit input); /// Normalizes given vector to have RCL_UNITS_PER_SQUARE length. RCL_Vector2D RCL_normalize(RCL_Vector2D v); /// Computes a cos of an angle between two vectors. RCL_Unit RCL_vectorsAngleCos(RCL_Vector2D v1, RCL_Vector2D v2); uint16_t RCL_sqrtInt(RCL_Unit value); RCL_Unit RCL_dist(RCL_Vector2D p1, RCL_Vector2D p2); RCL_Unit RCL_len(RCL_Vector2D v); /** Converts an angle in whole degrees to an angle in RCL_Units that this library uses. */ RCL_Unit RCL_degreesToUnitsAngle(int16_t degrees); ///< Computes the change in size of an object due to perspective. RCL_Unit RCL_perspectiveScale(RCL_Unit originalSize, RCL_Unit distance); RCL_Unit RCL_perspectiveScaleInverse(RCL_Unit originalSize, RCL_Unit scaledSize); /** Casts rays for given camera view and for each hit calls a user provided function. */ void RCL_castRaysMultiHit(RCL_Camera cam, RCL_ArrayFunction arrayFunc, RCL_ArrayFunction typeFunction, RCL_ColumnFunction columnFunc, RCL_RayConstraints constraints); /** Using provided functions, renders a complete complex (multilevel) camera view. This function should render each screen pixel exactly once. function rendering summary: - performance: slower - accuracy: higher - wall textures: yes - different wall heights: yes - floor/ceiling textures: no - floor geometry: yes, multilevel - ceiling geometry: yes (optional), multilevel - rolling door: no - camera shearing: yes - rendering order: left-to-right, not specifically ordered vertically @param cam camera whose view to render @param floorHeightFunc function that returns floor height (in RCL_Units) @param ceilingHeightFunc same as floorHeightFunc but for ceiling, can also be 0 (no ceiling will be rendered) @param typeFunction function that says a type of square (e.g. its texture index), can be 0 (no type in hit result) @param pixelFunc callback function to draw a single pixel on screen @param constraints constraints for each cast ray */ void RCL_renderComplex(RCL_Camera cam, RCL_ArrayFunction floorHeightFunc, RCL_ArrayFunction ceilingHeightFunc, RCL_ArrayFunction typeFunction, RCL_RayConstraints constraints); /** Renders given camera view, with help of provided functions. This function is simpler and faster than RCL_renderComplex(...) and is meant to be rendering flat levels. function rendering summary: - performance: faster - accuracy: lower - wall textures: yes - different wall heights: yes - floor/ceiling textures: yes (only floor, you can mirror it for ceiling) - floor geometry: no (just flat floor, with depth information) - ceiling geometry: no (just flat ceiling, with depth information) - rolling door: yes - camera shearing: no - rendering order: left-to-right, top-to-bottom Additionally this function supports rendering rolling doors. This function should render each screen pixel exactly once. @param rollFunc function that for given square says its door roll in RCL_Units (0 = no roll, RCL_UNITS_PER_SQUARE = full roll right, -RCL_UNITS_PER_SQUARE = full roll left), can be zero (no rolling door, rendering should also be faster as fewer intersections will be tested) */ void RCL_renderSimple(RCL_Camera cam, RCL_ArrayFunction floorHeightFunc, RCL_ArrayFunction typeFunc, RCL_ArrayFunction rollFunc, RCL_RayConstraints constraints); /** Function that moves given camera and makes it collide with walls and potentially also floor and ceilings. It's meant to help implement player movement. @param camera camera to move @param planeOffset offset to move the camera in @param heightOffset height offset to move the camera in @param floorHeightFunc function used to retrieve the floor height @param ceilingHeightFunc function for retrieving ceiling height, can be 0 (camera won't collide with ceiling) @param computeHeight whether to compute height - if false (0), floor and ceiling functions won't be used and the camera will only collide horizontally with walls (good for simpler game, also faster) @param force if true, forces to recompute collision even if position doesn't change */ void RCL_moveCameraWithCollision(RCL_Camera *camera, RCL_Vector2D planeOffset, RCL_Unit heightOffset, RCL_ArrayFunction floorHeightFunc, RCL_ArrayFunction ceilingHeightFunc, int8_t computeHeight, int8_t force); void RCL_initCamera(RCL_Camera *camera); void RCL_initRayConstraints(RCL_RayConstraints *constraints); //============================================================================= // privates // global helper variables, for precomputing stuff etc. RCL_Camera _RCL_camera; RCL_Unit _RCL_horizontalDepthStep = 0; RCL_Unit _RCL_startFloorHeight = 0; RCL_Unit _RCL_startCeil_Height = 0; RCL_Unit _RCL_camResYLimit = 0; RCL_Unit _RCL_middleRow = 0; RCL_ArrayFunction _RCL_floorFunction = 0; RCL_ArrayFunction _RCL_ceilFunction = 0; RCL_Unit _RCL_fHorizontalDepthStart = 0; RCL_Unit _RCL_cHorizontalDepthStart = 0; int16_t _RCL_cameraHeightScreen = 0; RCL_ArrayFunction _RCL_rollFunction = 0; // says door rolling RCL_Unit *_RCL_floorPixelDistances = 0; #ifdef RCL_PROFILE // function call counters for profiling uint32_t profile_RCL_sqrtInt = 0; uint32_t profile_RCL_clamp = 0; uint32_t profile_RCL_cosInt = 0; uint32_t profile_RCL_angleToDirection = 0; uint32_t profile_RCL_dist = 0; uint32_t profile_RCL_len = 0; uint32_t profile_RCL_pointIfLeftOfRay = 0; uint32_t profile_RCL_castRaySquare = 0; uint32_t profile_RCL_castRayMultiHit = 0; uint32_t profile_RCL_castRay = 0; uint32_t profile_RCL_absVal = 0; uint32_t profile_RCL_normalize = 0; uint32_t profile_RCL_vectorsAngleCos = 0; uint32_t profile_RCL_perspectiveScale = 0; uint32_t profile_RCL_wrap = 0; uint32_t profile_RCL_divRoundDown = 0; #define RCL_profileCall(c) profile_##c += 1 #define printProfile() {\ printf("profile:\n");\ printf(" RCL_sqrtInt: %d\n",profile_RCL_sqrtInt);\ printf(" RCL_clamp: %d\n",profile_RCL_clamp);\ printf(" RCL_cosInt: %d\n",profile_RCL_cosInt);\ printf(" RCL_angleToDirection: %d\n",profile_RCL_angleToDirection);\ printf(" RCL_dist: %d\n",profile_RCL_dist);\ printf(" RCL_len: %d\n",profile_RCL_len);\ printf(" RCL_pointIfLeftOfRay: %d\n",profile_RCL_pointIfLeftOfRay);\ printf(" RCL_castRaySquare: %d\n",profile_RCL_castRaySquare);\ printf(" RCL_castRayMultiHit : %d\n",profile_RCL_castRayMultiHit);\ printf(" RCL_castRay: %d\n",profile_RCL_castRay);\ printf(" RCL_normalize: %d\n",profile_RCL_normalize);\ printf(" RCL_vectorsAngleCos: %d\n",profile_RCL_vectorsAngleCos);\ printf(" RCL_absVal: %d\n",profile_RCL_absVal);\ printf(" RCL_perspectiveScale: %d\n",profile_RCL_perspectiveScale);\ printf(" RCL_wrap: %d\n",profile_RCL_wrap);\ printf(" RCL_divRoundDown: %d\n",profile_RCL_divRoundDown); } #else #define RCL_profileCall(c) #endif RCL_Unit RCL_clamp(RCL_Unit value, RCL_Unit valueMin, RCL_Unit valueMax) { RCL_profileCall(RCL_clamp); if (value >= valueMin) { if (value <= valueMax) return value; else return valueMax; } else return valueMin; } static inline RCL_Unit RCL_absVal(RCL_Unit value) { RCL_profileCall(RCL_absVal); return value >= 0 ? value : -1 * value; } /// Like mod, but behaves differently for negative values. static inline RCL_Unit RCL_wrap(RCL_Unit value, RCL_Unit mod) { RCL_profileCall(RCL_wrap); return value >= 0 ? (value % mod) : (mod + (value % mod) - 1); } /// Performs division, rounding down, NOT towards zero. static inline RCL_Unit RCL_divRoundDown(RCL_Unit value, RCL_Unit divisor) { RCL_profileCall(RCL_divRoundDown); return value / divisor - ((value >= 0) ? 0 : 1); } // Bhaskara's cosine approximation formula #define trigHelper(x) (((RCL_Unit) RCL_UNITS_PER_SQUARE) *\ (RCL_UNITS_PER_SQUARE / 2 * RCL_UNITS_PER_SQUARE / 2 - 4 * (x) * (x)) /\ (RCL_UNITS_PER_SQUARE / 2 * RCL_UNITS_PER_SQUARE / 2 + (x) * (x))) #if RCL_USE_COS_LUT == 1 #ifdef RCL_RAYCAST_TINY const RCL_Unit cosLUT[64] = { 16,14,11,6,0,-6,-11,-14,-15,-14,-11,-6,0,6,11,14 }; #else const RCL_Unit cosLUT[64] = { 1024,1019,1004,979,946,903,851,791,724,649,568,482,391,297,199,100,0,-100, -199,-297,-391,-482,-568,-649,-724,-791,-851,-903,-946,-979,-1004,-1019, -1023,-1019,-1004,-979,-946,-903,-851,-791,-724,-649,-568,-482,-391,-297, -199,-100,0,100,199,297,391,482,568,649,724,791,851,903,946,979,1004,1019 }; #endif #elif RCL_USE_COS_LUT == 2 const RCL_Unit cosLUT[128] = { 1024,1022,1019,1012,1004,993,979,964,946,925,903,878,851,822,791,758,724, 687,649,609,568,526,482,437,391,344,297,248,199,150,100,50,0,-50,-100,-150, -199,-248,-297,-344,-391,-437,-482,-526,-568,-609,-649,-687,-724,-758,-791, -822,-851,-878,-903,-925,-946,-964,-979,-993,-1004,-1012,-1019,-1022,-1023, -1022,-1019,-1012,-1004,-993,-979,-964,-946,-925,-903,-878,-851,-822,-791, -758,-724,-687,-649,-609,-568,-526,-482,-437,-391,-344,-297,-248,-199,-150, -100,-50,0,50,100,150,199,248,297,344,391,437,482,526,568,609,649,687,724, 758,791,822,851,878,903,925,946,964,979,993,1004,1012,1019,1022 }; #endif RCL_Unit RCL_cosInt(RCL_Unit input) { RCL_profileCall(RCL_cosInt); input = RCL_wrap(input,RCL_UNITS_PER_SQUARE); #if RCL_USE_COS_LUT == 1 #ifdef RCL_RAYCAST_TINY return cosLUT[input]; #else return cosLUT[input / 16]; #endif #elif RCL_USE_COS_LUT == 2 return cosLUT[input / 8]; #else if (input < RCL_UNITS_PER_SQUARE / 4) return trigHelper(input); else if (input < RCL_UNITS_PER_SQUARE / 2) return -1 * trigHelper(RCL_UNITS_PER_SQUARE / 2 - input); else if (input < 3 * RCL_UNITS_PER_SQUARE / 4) return -1 * trigHelper(input - RCL_UNITS_PER_SQUARE / 2); else return trigHelper(RCL_UNITS_PER_SQUARE - input); #endif } #undef trigHelper RCL_Unit RCL_sinInt(RCL_Unit input) { return RCL_cosInt(input - RCL_UNITS_PER_SQUARE / 4); } RCL_Vector2D RCL_angleToDirection(RCL_Unit angle) { RCL_profileCall(RCL_angleToDirection); RCL_Vector2D result; result.x = RCL_cosInt(angle); result.y = -1 * RCL_sinInt(angle); return result; } uint16_t RCL_sqrtInt(RCL_Unit value) { RCL_profileCall(RCL_sqrtInt); #ifdef RCL_RAYCAST_TINY uint16_t result = 0; uint16_t a = value; uint16_t b = 1u << 14; #else uint32_t result = 0; uint32_t a = value; uint32_t b = 1u << 30; #endif while (b > a) b >>= 2; while (b != 0) { if (a >= result + b) { a -= result + b; result = result + 2 * b; } b >>= 2; result >>= 1; } return result; } RCL_Unit RCL_dist(RCL_Vector2D p1, RCL_Vector2D p2) { RCL_profileCall(RCL_dist); RCL_Unit dx = p2.x - p1.x; RCL_Unit dy = p2.y - p1.y; #if RCL_USE_DIST_APPROX == 2 // octagonal approximation dx = RCL_absVal(dx); dy = RCL_absVal(dy); return dy > dx ? dx / 2 + dy : dy / 2 + dx; #elif RCL_USE_DIST_APPROX == 1 // more accurate approximation RCL_Unit a, b, result; dx = dx < 0 ? -1 * dx : dx; dy = dy < 0 ? -1 * dy : dy; if (dx < dy) { a = dy; b = dx; } else { a = dx; b = dy; } result = a + (44 * b) / 102; if (a < (b << 4)) result -= (5 * a) / 128; return result; #else dx = dx * dx; dy = dy * dy; return RCL_sqrtInt((RCL_Unit) (dx + dy)); #endif } RCL_Unit RCL_len(RCL_Vector2D v) { RCL_profileCall(RCL_len); RCL_Vector2D zero; zero.x = 0; zero.y = 0; return RCL_dist(zero,v); } static inline int8_t RCL_pointIfLeftOfRay(RCL_Vector2D point, RCL_Ray ray) { RCL_profileCall(RCL_pointIfLeftOfRay); RCL_Unit dX = point.x - ray.start.x; RCL_Unit dY = point.y - ray.start.y; return (ray.direction.x * dY - ray.direction.y * dX) > 0; // ^ Z component of cross-product } /** Casts a ray within a single square, to collide with the square borders. */ void RCL_castRaySquare(RCL_Ray *localRay, RCL_Vector2D *nextCellOff, RCL_Vector2D *collOff) { RCL_profileCall(RCL_castRaySquare); nextCellOff->x = 0; nextCellOff->y = 0; RCL_Ray criticalLine; criticalLine.start = localRay->start; criticalLine.direction = localRay->direction; #define helper(c1,c2,n)\ {\ nextCellOff->c1 = n;\ collOff->c1 = criticalLine.start.c1 - localRay->start.c1;\ collOff->c2 = \ (((RCL_Unit) collOff->c1) * localRay->direction.c2) /\ ((localRay->direction.c1 == 0) ? 1 : localRay->direction.c1);\ } #define helper2(n1,n2,c)\ if (RCL_pointIfLeftOfRay(localRay->start,criticalLine) == c)\ helper(y,x,n1)\ else\ helper(x,y,n2) if (localRay->direction.x > 0) { criticalLine.start.x = RCL_UNITS_PER_SQUARE - 1; if (localRay->direction.y > 0) { // top right criticalLine.start.y = RCL_UNITS_PER_SQUARE - 1; helper2(1,1,1) } else { // bottom right criticalLine.start.y = 0; helper2(-1,1,0) } } else { criticalLine.start.x = 0; if (localRay->direction.y > 0) { // top left criticalLine.start.y = RCL_UNITS_PER_SQUARE - 1; helper2(1,-1,0) } else { // bottom left criticalLine.start.y = 0; helper2(-1,-1,1) } } #undef helper2 #undef helper collOff->x += nextCellOff->x; collOff->y += nextCellOff->y; } int aaaaaa = 0; void RCL_castRayMultiHit(RCL_Ray ray, RCL_ArrayFunction arrayFunc, RCL_ArrayFunction typeFunc, RCL_HitResult *hitResults, uint16_t *hitResultsLen, RCL_RayConstraints constraints) { RCL_profileCall(RCL_castRayMultiHit); RCL_Vector2D initialPos = ray.start; RCL_Vector2D currentPos = ray.start; RCL_Vector2D currentSquare; currentSquare.x = RCL_divRoundDown(ray.start.x,RCL_UNITS_PER_SQUARE); currentSquare.y = RCL_divRoundDown(ray.start.y,RCL_UNITS_PER_SQUARE); *hitResultsLen = 0; RCL_Unit squareType = arrayFunc(currentSquare.x,currentSquare.y); RCL_Vector2D no, co; // next cell offset, collision offset no.x = 0; // just to supress a warning no.y = 0; co.x = 0; co.y = 0; RCL_Vector2D nextSideDist; RCL_Vector2D delta; RCL_Unit currentDist = 0; RCL_Vector2D step; nextSideDist.x = 0; nextSideDist.y = 0; RCL_Unit dirVecLength = RCL_len(ray.direction); delta.x = RCL_absVal((RCL_UNITS_PER_SQUARE * dirVecLength) / RCL_nonZero(ray.direction.x)); delta.y = RCL_absVal((RCL_UNITS_PER_SQUARE * dirVecLength) / RCL_nonZero(ray.direction.y)); int8_t stepHorizontal = 0; if (ray.direction.x < 0) { step.x = -1; nextSideDist.x = (RCL_wrap(ray.start.x,RCL_UNITS_PER_SQUARE) * delta.x) / RCL_UNITS_PER_SQUARE; } else { step.x = 1; nextSideDist.x = ((RCL_wrap(RCL_UNITS_PER_SQUARE - ray.start.x,RCL_UNITS_PER_SQUARE)) * delta.x) / RCL_UNITS_PER_SQUARE; } if (ray.direction.y < 0) { step.y = -1; nextSideDist.y = (RCL_wrap(ray.start.y,RCL_UNITS_PER_SQUARE) * delta.y) / RCL_UNITS_PER_SQUARE; } else { step.y = 1; nextSideDist.y = ((RCL_wrap(RCL_UNITS_PER_SQUARE - ray.start.y,RCL_UNITS_PER_SQUARE)) * delta.y) / RCL_UNITS_PER_SQUARE; } for (uint16_t i = 0; i < constraints.maxSteps; ++i) { RCL_Unit currentType = arrayFunc(currentSquare.x,currentSquare.y); if (currentType != squareType) { // collision RCL_HitResult h; h.arrayValue = currentType; h.doorRoll = 0; h.position = currentPos; h.square = currentSquare; // h.distance = RCL_dist(initialPos,currentPos); h.distance = currentDist; if (stepHorizontal) { h.position.x = currentSquare.x * RCL_UNITS_PER_SQUARE; h.direction = 3; if (step.x == -1) { h.direction = 1; h.position.x += RCL_UNITS_PER_SQUARE; } RCL_Unit diff = h.position.x - ray.start.x; h.position.y = ray.start.y + ((ray.direction.y * diff) / RCL_nonZero(ray.direction.x)); h.textureCoord = h.position.y; h.distance = ((h.position.x - ray.start.x) * RCL_UNITS_PER_SQUARE) / RCL_nonZero(ray.direction.x); } else { h.position.y = currentSquare.y * RCL_UNITS_PER_SQUARE; h.direction = 2; if (step.y == -1) { h.direction = 0; h.position.y += RCL_UNITS_PER_SQUARE; } RCL_Unit diff = h.position.y - ray.start.y; h.position.x = ray.start.x + ((ray.direction.x * diff) / RCL_nonZero(ray.direction.y)); h.textureCoord = h.position.x; h.distance = ((h.position.y - ray.start.y) * RCL_UNITS_PER_SQUARE) / RCL_nonZero(ray.direction.y); } if (typeFunc != 0) h.type = typeFunc(currentSquare.x,currentSquare.y); /* if (no.y > 0) { h.direction = 0; #if RCL_COMPUTE_WALL_TEXCOORDS == 1 h.textureCoord = RCL_wrap(currentPos.x,RCL_UNITS_PER_SQUARE); #endif } else if (no.x > 0) { h.direction = 1; #if RCL_COMPUTE_WALL_TEXCOORDS == 1 h.textureCoord = RCL_wrap(RCL_UNITS_PER_SQUARE - currentPos.y,RCL_UNITS_PER_SQUARE); #endif } else if (no.y < 0) { h.direction = 2; #if RCL_COMPUTE_WALL_TEXCOORDS == 1 h.textureCoord = RCL_wrap(RCL_UNITS_PER_SQUARE - currentPos.x,RCL_UNITS_PER_SQUARE); #endif } else { h.direction = 3; #if RCL_COMPUTE_WALL_TEXCOORDS == 1 h.textureCoord = RCL_wrap(currentPos.y,RCL_UNITS_PER_SQUARE); #endif } */ #if RCL_COMPUTE_WALL_TEXCOORDS == 1 if (_RCL_rollFunction != 0) h.doorRoll = _RCL_rollFunction(currentSquare.x,currentSquare.y); #endif hitResults[*hitResultsLen] = h; *hitResultsLen += 1; squareType = currentType; if (*hitResultsLen >= constraints.maxHits) break; } // ray.start.x = RCL_wrap(currentPos.x,RCL_UNITS_PER_SQUARE); // ray.start.y = RCL_wrap(currentPos.y,RCL_UNITS_PER_SQUARE); if (nextSideDist.x < nextSideDist.y) { currentDist = nextSideDist.x; nextSideDist.x += delta.x; currentSquare.x += step.x; stepHorizontal = 1; } else { currentDist = nextSideDist.y; nextSideDist.y += delta.y; currentSquare.y += step.y; stepHorizontal = 0; } // RCL_castRaySquare(&ray,&no,&co); // currentSquare.x += no.x; // currentSquare.y += no.y; // offset into the next cell // currentPos.x += co.x; // currentPos.y += co.y; } } RCL_HitResult RCL_castRay(RCL_Ray ray, RCL_ArrayFunction arrayFunc) { RCL_profileCall(RCL_castRay); RCL_HitResult result; uint16_t RCL_len; RCL_RayConstraints c; c.maxSteps = 1000; c.maxHits = 1; RCL_castRayMultiHit(ray,arrayFunc,0,&result,&RCL_len,c); if (RCL_len == 0) result.distance = -1; return result; } void RCL_castRaysMultiHit(RCL_Camera cam, RCL_ArrayFunction arrayFunc, RCL_ArrayFunction typeFunction, RCL_ColumnFunction columnFunc, RCL_RayConstraints constraints) { RCL_Vector2D dir1 = RCL_angleToDirection(cam.direction - RCL_HORIZONTAL_FOV_HALF); RCL_Vector2D dir2 = RCL_angleToDirection(cam.direction + RCL_HORIZONTAL_FOV_HALF); RCL_Unit dX = dir2.x - dir1.x; RCL_Unit dY = dir2.y - dir1.y; RCL_HitResult hits[constraints.maxHits]; uint16_t hitCount; RCL_Ray r; r.start = cam.position; RCL_Unit currentDX = 0; RCL_Unit currentDY = 0; for (int16_t i = 0; i < cam.resolution.x; ++i) { aaaaaa = i == 100; r.direction.x = dir1.x + currentDX / cam.resolution.x; r.direction.y = dir1.y + currentDY / cam.resolution.x; RCL_castRayMultiHit(r,arrayFunc,typeFunction,hits,&hitCount,constraints); columnFunc(hits,hitCount,i,r); currentDX += dX; currentDY += dY; } } /** Helper function that determines intersection with both ceiling and floor. */ RCL_Unit _RCL_floorCeilFunction(int16_t x, int16_t y) { RCL_Unit f = _RCL_floorFunction(x,y); if (_RCL_ceilFunction == 0) return f; RCL_Unit c = _RCL_ceilFunction(x,y); #ifndef RCL_RAYCAST_TINY return ((f & 0x0000ffff) << 16) | (c & 0x0000ffff); #else return ((f & 0x00ff) << 8) | (c & 0x00ff); #endif } RCL_Unit _floorHeightNotZeroFunction(int16_t x, int16_t y) { return _RCL_floorFunction(x,y) == 0 ? 0 : (x & 0x00FF) | ((y & 0x00FF) << 8); // ^ this makes collisions between all squares - needed for rolling doors } RCL_Unit RCL_adjustDistance(RCL_Unit distance, RCL_Camera *camera, RCL_Ray *ray) { /* FIXME/TODO: The adjusted (=orthogonal, camera-space) distance could possibly be computed more efficiently by not computing Euclidean distance at all, but rather compute the distance of the collision point from the projection plane (line). */ RCL_Unit result = (distance * RCL_vectorsAngleCos(RCL_angleToDirection(camera->direction), ray->direction)) / RCL_UNITS_PER_SQUARE; return RCL_nonZero(result); // ^ prevent division by zero } /// Helper for drawing floor or ceiling. Returns the last drawn pixel position. static inline int16_t _RCL_drawHorizontal( RCL_Unit yCurrent, RCL_Unit yTo, RCL_Unit limit1, // TODO: int16_t? RCL_Unit limit2, RCL_Unit verticalOffset, int16_t increment, int8_t computeDepth, int8_t computeCoords, int16_t depthIncrementMultiplier, RCL_Ray *ray, RCL_PixelInfo *pixelInfo ) { RCL_Unit depthIncrement; RCL_Unit dx; RCL_Unit dy; RCL_Unit pixPos; RCL_Unit rayCameraCos; pixelInfo->isWall = 0; int16_t limit = RCL_clamp(yTo,limit1,limit2); /* for performance reasons have different version of the critical loop to be able to branch early */ #define loop(doDepth,doCoords)\ {\ if (doDepth) /*constant condition - compiler should optimize it out*/\ {\ pixelInfo->depth += RCL_absVal(verticalOffset) *\ RCL_VERTICAL_DEPTH_MULTIPLY;\ depthIncrement = depthIncrementMultiplier *\ _RCL_horizontalDepthStep;\ }\ if (doCoords) /*constant condition - compiler should optimize it out*/\ {\ dx = pixelInfo->hit.position.x - _RCL_camera.position.x;\ dy = pixelInfo->hit.position.y - _RCL_camera.position.y;\ pixPos = yCurrent - _RCL_middleRow - 1;\ rayCameraCos = RCL_vectorsAngleCos(\ RCL_angleToDirection(_RCL_camera.direction),ray->direction);\ }\ for (int16_t i = yCurrent + increment;\ increment == -1 ? i >= limit : i <= limit; /* TODO: is efficient? */\ i += increment)\ {\ pixelInfo->position.y = i;\ if (doDepth) /*constant condition - compiler should optimize it out*/\ pixelInfo->depth += depthIncrement;\ if (doCoords)/*constant condition - compiler should optimize it out*/\ {\ RCL_Unit d = _RCL_floorPixelDistances[pixPos];\ /* d = (d * RCL_UNITS_PER_SQUARE) / rayCameraCos;*/\ /* ^ inverse of RCL_adjustDistance(...) */\ pixelInfo->texCoords.x =\ _RCL_camera.position.x + ((d * dx) / (pixelInfo->hit.distance));\ pixelInfo->texCoords.y =\ _RCL_camera.position.y + ((d * dy) / (pixelInfo->hit.distance));\ ++pixPos;\ }\ RCL_PIXEL_FUNCTION(pixelInfo);\ }\ } if (computeDepth) // branch early { if (!computeCoords) loop(1,0) else loop(1,1) } else { if (!computeCoords) loop(0,0) else loop(1,1) } return limit; } /// Helper for drawing walls. Returns the last drawn pixel position. static inline int16_t _RCL_drawWall( RCL_Unit yCurrent, RCL_Unit yFrom, RCL_Unit yTo, RCL_Unit limit1, // TODO: int16_t? RCL_Unit limit2, RCL_Unit height, int16_t increment, RCL_PixelInfo *pixelInfo ) { pixelInfo->isWall = 1; RCL_Unit limit = RCL_clamp(yTo,limit1,limit2); RCL_Unit wallLength = yTo - yFrom - 1; wallLength = RCL_nonZero(wallLength); RCL_Unit wallPosition = RCL_absVal(yFrom - yCurrent) - increment; RCL_Unit coordStep = RCL_COMPUTE_WALL_TEXCOORDS ? #if RCL_TEXTURE_VERTICAL_STRETCH == 1 RCL_UNITS_PER_SQUARE / wallLength #else height / wallLength #endif : 1; pixelInfo->texCoords.y = RCL_COMPUTE_WALL_TEXCOORDS ? wallPosition * coordStep : 0; #if RCL_ACCURATE_WALL_TEXTURING == 1 if (1) #else if (RCL_absVal(coordStep) < RCL_MIN_TEXTURE_STEP) /* for the sake of performance there are two-versions of the loop - it's better to branch early than inside the loop */ #endif { for (RCL_Unit i = yCurrent + increment; increment == -1 ? i >= limit : i <= limit; // TODO: is efficient? i += increment) { // more expensive texture coord computing pixelInfo->position.y = i; #if RCL_COMPUTE_WALL_TEXCOORDS == 1 #if RCL_TEXTURE_VERTICAL_STRETCH == 1 pixelInfo->texCoords.y = (wallPosition * RCL_UNITS_PER_SQUARE) / wallLength; #else pixelInfo->texCoords.y = (wallPosition * height) / wallLength; #endif #endif wallPosition++; RCL_PIXEL_FUNCTION(pixelInfo); } } else { for (RCL_Unit i = yCurrent + increment; increment == -1 ? i >= limit : i <= limit; // TODO: is efficient? i += increment) { // cheaper texture coord computing pixelInfo->position.y = i; #if RCL_COMPUTE_WALL_TEXCOORDS == 1 pixelInfo->texCoords.y += coordStep; #endif RCL_PIXEL_FUNCTION(pixelInfo); } } return limit; } void _RCL_columnFunctionComplex(RCL_HitResult *hits, uint16_t hitCount, uint16_t x, RCL_Ray ray) { // last written Y position, can never go backwards RCL_Unit fPosY = _RCL_camera.resolution.y; RCL_Unit cPosY = -1; // world coordinates RCL_Unit fZ1World = _RCL_startFloorHeight; RCL_Unit cZ1World = _RCL_startCeil_Height; RCL_PixelInfo p; p.position.x = x; p.texCoords.x = 0; p.texCoords.y = 0; // we'll be simulatenously drawing the floor and the ceiling now for (RCL_Unit j = 0; j <= hitCount; ++j) { // ^ = add extra iteration for horizon plane int8_t drawingHorizon = j == hitCount; RCL_HitResult hit; RCL_Unit distance; RCL_Unit fWallHeight = 0, cWallHeight = 0; RCL_Unit fZ2World = 0, cZ2World = 0; RCL_Unit fZ1Screen = 0, cZ1Screen = 0; RCL_Unit fZ2Screen = 0, cZ2Screen = 0; if (!drawingHorizon) { hit = hits[j]; // RCL_adjustDistance(hit.distance,&_RCL_camera,&ray); distance = hit.distance; fWallHeight = _RCL_floorFunction(hit.square.x,hit.square.y); fZ2World = fWallHeight - _RCL_camera.height; fZ1Screen = _RCL_middleRow - RCL_perspectiveScale( (fZ1World * _RCL_camera.resolution.y) / RCL_UNITS_PER_SQUARE,distance); fZ2Screen = _RCL_middleRow - RCL_perspectiveScale( (fZ2World * _RCL_camera.resolution.y) / RCL_UNITS_PER_SQUARE,distance); if (_RCL_ceilFunction != 0) { cWallHeight = _RCL_ceilFunction(hit.square.x,hit.square.y); cZ2World = cWallHeight - _RCL_camera.height; cZ1Screen = _RCL_middleRow - RCL_perspectiveScale( (cZ1World * _RCL_camera.resolution.y) / RCL_UNITS_PER_SQUARE,distance); cZ2Screen = _RCL_middleRow - RCL_perspectiveScale( (cZ2World * _RCL_camera.resolution.y) / RCL_UNITS_PER_SQUARE,distance); } } else { fZ1Screen = _RCL_middleRow; cZ1Screen = _RCL_middleRow + 1; } RCL_Unit limit; p.isWall = 0; p.isHorizon = drawingHorizon; // draw floor until wall p.isFloor = 1; #if RCL_COMPUTE_FLOOR_DEPTH == 1 p.depth = (_RCL_fHorizontalDepthStart - fPosY) * _RCL_horizontalDepthStep; #else p.depth = 0; #endif limit = _RCL_drawHorizontal(fPosY,fZ1Screen,cPosY + 1, _RCL_camera.resolution.y,fZ1World,-1,RCL_COMPUTE_FLOOR_DEPTH,0,1,&ray,&p); // ^ purposfully allow outside screen bounds if (fPosY > limit) fPosY = limit; if (_RCL_ceilFunction != 0 || drawingHorizon) { // draw ceiling until wall p.isFloor = 0; #if RCL_COMPUTE_CEILING_DEPTH == 1 p.depth = (cPosY - _RCL_cHorizontalDepthStart) * _RCL_horizontalDepthStep; #endif limit = _RCL_drawHorizontal(cPosY,cZ1Screen, -1,fPosY - 1,cZ1World,1,RCL_COMPUTE_CEILING_DEPTH,0,1,&ray,&p); // ^ purposfully allow outside screen bounds here if (cPosY < limit) cPosY = limit; } if (!drawingHorizon) // don't draw walls for horizon plane { p.isWall = 1; p.depth = distance; p.isFloor = 1; p.hit = hit; p.texCoords.x = hit.textureCoord; // draw floor wall if (fPosY > 0) // still pixels left? { p.isFloor = 1; limit = _RCL_drawWall(fPosY,fZ1Screen,fZ2Screen,cPosY + 1, _RCL_camera.resolution.y, // ^ purposfully allow outside screen bounds here #if RCL_TEXTURE_VERTICAL_STRETCH == 1 RCL_UNITS_PER_SQUARE #else fZ2World - fZ1World #endif ,-1,&p); if (fPosY > limit) fPosY = limit; fZ1World = fZ2World; // for the next iteration } // ^ purposfully allow outside screen bounds here // draw ceiling wall if (_RCL_ceilFunction != 0 && cPosY < _RCL_camResYLimit) // pixels left? { p.isFloor = 0; limit = _RCL_drawWall(cPosY,cZ1Screen,cZ2Screen, -1,fPosY - 1, // ^ puposfully allow outside screen bounds here #if RCL_TEXTURE_VERTICAL_STRETCH == 1 RCL_UNITS_PER_SQUARE #else cZ2World - cZ1World #endif ,1,&p); if (cPosY < limit) cPosY = limit; cZ1World = cZ2World; // for the next iteration } // ^ puposfully allow outside screen bounds here } } } void _RCL_columnFunctionSimple(RCL_HitResult *hits, uint16_t hitCount, uint16_t x, RCL_Ray ray) { RCL_Unit y = 0; RCL_Unit wallHeightScreen = 0; RCL_Unit wallStart = _RCL_middleRow; RCL_Unit heightOffset = 0; RCL_Unit dist = 1; RCL_PixelInfo p; p.position.x = x; if (hitCount > 0) { RCL_HitResult hit = hits[0]; uint8_t goOn = 1; if (_RCL_rollFunction != 0 && RCL_COMPUTE_WALL_TEXCOORDS == 1) { if (hit.arrayValue == 0) { // standing inside door square, looking out => move to the next hit if (hitCount > 1) hit = hits[1]; else goOn = 0; } else { // normal hit, check the door roll int8_t unrolled = hit.doorRoll >= 0 ? hit.doorRoll > hit.textureCoord : hit.textureCoord > RCL_UNITS_PER_SQUARE + hit.doorRoll; if (unrolled) { goOn = 0; if (hitCount > 1) /* should probably always be true (hit on square exit) */ { if (hit.direction % 2 != hits[1].direction % 2) { // hit on the inner side hit = hits[1]; goOn = 1; } else if (hitCount > 2) { // hit on the opposite side hit = hits[2]; goOn = 1; } } } } } p.hit = hit; if (goOn) { // dist = RCL_adjustDistance(hit.distance,&_RCL_camera,&ray); dist = hit.distance; int16_t wallHeightWorld = _RCL_floorFunction(hit.square.x,hit.square.y); wallHeightScreen = RCL_perspectiveScale((wallHeightWorld * _RCL_camera.resolution.y) / RCL_UNITS_PER_SQUARE,dist); int16_t RCL_normalizedWallHeight = wallHeightWorld != 0 ? ((RCL_UNITS_PER_SQUARE * wallHeightScreen) / wallHeightWorld) : 0; heightOffset = RCL_perspectiveScale(_RCL_cameraHeightScreen,dist); wallStart = _RCL_middleRow - wallHeightScreen + heightOffset + RCL_normalizedWallHeight; } } // draw ceiling p.isWall = 0; p.isFloor = 0; p.isHorizon = 1; p.depth = 1; RCL_Unit limit = RCL_min(wallStart,_RCL_middleRow); // ^ in case there is no wall y = _RCL_drawHorizontal(-1,wallStart,-1,_RCL_middleRow,_RCL_camera.height,1, RCL_COMPUTE_CEILING_DEPTH,0,1,&ray,&p); // draw wall p.isWall = 1; p.isFloor = 1; p.depth = dist; #if RCL_ROLL_TEXTURE_COORDS == 1 && RCL_COMPUTE_WALL_TEXCOORDS == 1 p.hit.textureCoord -= p.hit.doorRoll; #endif p.texCoords.x = p.hit.textureCoord; limit = _RCL_drawWall(y,wallStart,wallStart + wallHeightScreen - 1,-1, _RCL_camResYLimit,p.hit.arrayValue,1,&p); y = RCL_max(y,limit); // take max, in case no wall was drawn // draw floor p.isWall = 0; #if RCL_COMPUTE_FLOOR_DEPTH == 1 p.depth = (_RCL_camera.resolution.y - y) * _RCL_horizontalDepthStep + 1; #endif _RCL_drawHorizontal(y,_RCL_camResYLimit,-1,_RCL_camResYLimit, _RCL_camera.height,1,RCL_COMPUTE_FLOOR_DEPTH,RCL_COMPUTE_FLOOR_TEXCOORDS, -1,&ray,&p); } void RCL_renderComplex(RCL_Camera cam, RCL_ArrayFunction floorHeightFunc, RCL_ArrayFunction ceilingHeightFunc, RCL_ArrayFunction typeFunction, RCL_RayConstraints constraints) { _RCL_floorFunction = floorHeightFunc; _RCL_ceilFunction = ceilingHeightFunc; _RCL_camera = cam; _RCL_camResYLimit = cam.resolution.y - 1; int16_t halfResY = cam.resolution.y / 2; _RCL_middleRow = halfResY + cam.shear; _RCL_fHorizontalDepthStart = _RCL_middleRow + halfResY; _RCL_cHorizontalDepthStart = _RCL_middleRow - halfResY; _RCL_startFloorHeight = floorHeightFunc( RCL_divRoundDown(cam.position.x,RCL_UNITS_PER_SQUARE), RCL_divRoundDown(cam.position.y,RCL_UNITS_PER_SQUARE)) -1 * cam.height; _RCL_startCeil_Height = ceilingHeightFunc != 0 ? ceilingHeightFunc( RCL_divRoundDown(cam.position.x,RCL_UNITS_PER_SQUARE), RCL_divRoundDown(cam.position.y,RCL_UNITS_PER_SQUARE)) -1 * cam.height : RCL_INFINITY; _RCL_horizontalDepthStep = HORIZON_DEPTH / cam.resolution.y; RCL_castRaysMultiHit(cam,_RCL_floorCeilFunction,typeFunction, _RCL_columnFunctionComplex,constraints); } void RCL_renderSimple(RCL_Camera cam, RCL_ArrayFunction floorHeightFunc, RCL_ArrayFunction typeFunc, RCL_ArrayFunction rollFunc, RCL_RayConstraints constraints) { _RCL_floorFunction = floorHeightFunc; _RCL_camera = cam; _RCL_camResYLimit = cam.resolution.y - 1; _RCL_middleRow = cam.resolution.y / 2; _RCL_rollFunction = rollFunc; _RCL_cameraHeightScreen = (_RCL_camera.resolution.y * (_RCL_camera.height - RCL_UNITS_PER_SQUARE)) / RCL_UNITS_PER_SQUARE; _RCL_horizontalDepthStep = HORIZON_DEPTH / cam.resolution.y; constraints.maxHits = _RCL_rollFunction == 0 ? 1 : // no door => 1 hit is enough 3; // for correctly rendering rolling doors we'll need 3 hits (NOT 2) #if RCL_COMPUTE_FLOOR_TEXCOORDS == 1 uint16_t halfResY = cam.resolution.y / 2; RCL_Unit floorPixelDistances[halfResY]; /* for each vertical floor pixel, this will contain precomputed distance to the camera */ RCL_Unit camHeightScreenSize = #ifdef RCL_RAYCAST_TINY (cam.height #else (((cam.height >> 6) << 6) // prevent weird floor movement with rounding #endif * cam.resolution.y) / RCL_UNITS_PER_SQUARE; for (uint16_t i = 0; i < halfResY; ++i) // precompute the distances floorPixelDistances[i] = RCL_perspectiveScaleInverse(camHeightScreenSize,i); // pass to _RCL_columnFunctionSimple _RCL_floorPixelDistances = floorPixelDistances; #endif RCL_castRaysMultiHit(cam,_floorHeightNotZeroFunction,typeFunc, _RCL_columnFunctionSimple, constraints); #if RCL_COMPUTE_FLOOR_TEXCOORDS == 1 _RCL_floorPixelDistances = 0; #endif } RCL_Vector2D RCL_normalize(RCL_Vector2D v) { RCL_profileCall(RCL_normalize); RCL_Vector2D result; RCL_Unit l = RCL_len(v); l = RCL_nonZero(l); result.x = (v.x * RCL_UNITS_PER_SQUARE) / l; result.y = (v.y * RCL_UNITS_PER_SQUARE) / l; return result; } RCL_Unit RCL_vectorsAngleCos(RCL_Vector2D v1, RCL_Vector2D v2) { RCL_profileCall(RCL_vectorsAngleCos); v1 = RCL_normalize(v1); v2 = RCL_normalize(v2); return (v1.x * v2.x + v1.y * v2.y) / RCL_UNITS_PER_SQUARE; } RCL_PixelInfo RCL_mapToScreen(RCL_Vector2D worldPosition, RCL_Unit height, RCL_Camera camera) { RCL_PixelInfo result; RCL_Unit d = RCL_dist(worldPosition,camera.position); RCL_Vector2D toPoint; toPoint.x = worldPosition.x - camera.position.x; toPoint.y = worldPosition.y - camera.position.y; RCL_Vector2D cameraDir = RCL_angleToDirection(camera.direction); result.depth = // adjusted distance (d * RCL_vectorsAngleCos(cameraDir,toPoint)) / RCL_UNITS_PER_SQUARE; result.position.y = camera.resolution.y / 2 - (camera.resolution.y * RCL_perspectiveScale(height - camera.height,result.depth)) / RCL_UNITS_PER_SQUARE + camera.shear; RCL_Unit middleColumn = camera.resolution.x / 2; RCL_Unit a = RCL_sqrtInt(d * d - result.depth * result.depth); RCL_Ray r; r.start = camera.position; r.direction = cameraDir; if (!RCL_pointIfLeftOfRay(worldPosition,r)) a *= -1; RCL_Unit cos = RCL_cosInt(RCL_HORIZONTAL_FOV_HALF); RCL_Unit b = (result.depth * RCL_sinInt(RCL_HORIZONTAL_FOV_HALF)) / RCL_nonZero(cos); // sin/cos = tan result.position.x = (a * middleColumn) / RCL_nonZero(b); result.position.x = middleColumn - result.position.x; return result; } RCL_Unit RCL_degreesToUnitsAngle(int16_t degrees) { return (degrees * RCL_UNITS_PER_SQUARE) / 360; } RCL_Unit RCL_perspectiveScale(RCL_Unit originalSize, RCL_Unit distance) { RCL_profileCall(RCL_perspectiveScale); return distance != 0 ? (originalSize * RCL_UNITS_PER_SQUARE) / ((RCL_VERTICAL_FOV * 2 * distance) / RCL_UNITS_PER_SQUARE) : 0; } RCL_Unit RCL_perspectiveScaleInverse(RCL_Unit originalSize, RCL_Unit scaledSize) { return scaledSize != 0 ? (originalSize * RCL_UNITS_PER_SQUARE) / ((RCL_VERTICAL_FOV * 2 * scaledSize) / RCL_UNITS_PER_SQUARE) : 0; } void RCL_moveCameraWithCollision(RCL_Camera *camera, RCL_Vector2D planeOffset, RCL_Unit heightOffset, RCL_ArrayFunction floorHeightFunc, RCL_ArrayFunction ceilingHeightFunc, int8_t computeHeight, int8_t force) { int8_t movesInPlane = planeOffset.x != 0 || planeOffset.y != 0; int16_t xSquareNew, ySquareNew; if (movesInPlane || force) { RCL_Vector2D corner; // BBox corner in the movement direction RCL_Vector2D cornerNew; int16_t xDir = planeOffset.x > 0 ? 1 : -1; int16_t yDir = planeOffset.y > 0 ? 1 : -1; corner.x = camera->position.x + xDir * RCL_CAMERA_COLL_RADIUS; corner.y = camera->position.y + yDir * RCL_CAMERA_COLL_RADIUS; int16_t xSquare = RCL_divRoundDown(corner.x,RCL_UNITS_PER_SQUARE); int16_t ySquare = RCL_divRoundDown(corner.y,RCL_UNITS_PER_SQUARE); cornerNew.x = corner.x + planeOffset.x; cornerNew.y = corner.y + planeOffset.y; xSquareNew = RCL_divRoundDown(cornerNew.x,RCL_UNITS_PER_SQUARE); ySquareNew = RCL_divRoundDown(cornerNew.y,RCL_UNITS_PER_SQUARE); RCL_Unit bottomLimit = -1 * RCL_INFINITY; RCL_Unit topLimit = RCL_INFINITY; if (computeHeight) { bottomLimit = camera->height - RCL_CAMERA_COLL_HEIGHT_BELOW + RCL_CAMERA_COLL_STEP_HEIGHT; topLimit = camera->height + RCL_CAMERA_COLL_HEIGHT_ABOVE; } // checks a single square for collision against the camera #define collCheck(dir,s1,s2)\ if (computeHeight)\ {\ RCL_Unit height = floorHeightFunc(s1,s2);\ if (height > bottomLimit)\ dir##Collides = 1;\ else if (ceilingHeightFunc != 0)\ {\ height = ceilingHeightFunc(s1,s2);\ if (height < topLimit)\ dir##Collides = 1;\ }\ }\ else\ dir##Collides = floorHeightFunc(s1,s2) > RCL_CAMERA_COLL_STEP_HEIGHT; // check a collision against non-diagonal square #define collCheckOrtho(dir,dir2,s1,s2,x)\ if (dir##SquareNew != dir##Square)\ {\ collCheck(dir,s1,s2)\ }\ if (!dir##Collides)\ { /* now also check for coll on the neighbouring square */ \ int16_t dir2##Square2 = RCL_divRoundDown(corner.dir2 - dir2##Dir *\ RCL_CAMERA_COLL_RADIUS * 2,RCL_UNITS_PER_SQUARE);\ if (dir2##Square2 != dir2##Square)\ {\ if (x)\ collCheck(dir,dir##SquareNew,dir2##Square2)\ else\ collCheck(dir,dir2##Square2,dir##SquareNew)\ }\ } int8_t xCollides = 0; collCheckOrtho(x,y,xSquareNew,ySquare,1) int8_t yCollides = 0; collCheckOrtho(y,x,xSquare,ySquareNew,0) #define collHandle(dir)\ if (dir##Collides)\ cornerNew.dir = (dir##Square) * RCL_UNITS_PER_SQUARE +\ RCL_UNITS_PER_SQUARE / 2 + dir##Dir * (RCL_UNITS_PER_SQUARE / 2) -\ dir##Dir;\ if (!xCollides && !yCollides) /* if non-diagonal collision happend, corner collision can't happen */ { if (xSquare != xSquareNew && ySquare != ySquareNew) // corner? { int8_t xyCollides = 0; collCheck(xy,xSquareNew,ySquareNew) if (xyCollides) { // normally should slide, but let's KISS cornerNew = corner; } } } collHandle(x) collHandle(y) #undef collCheck #undef collHandle camera->position.x = cornerNew.x - xDir * RCL_CAMERA_COLL_RADIUS; camera->position.y = cornerNew.y - yDir * RCL_CAMERA_COLL_RADIUS; } if (computeHeight && (movesInPlane || heightOffset != 0 || force)) { camera->height += heightOffset; int16_t xSquare1 = RCL_divRoundDown(camera->position.x - RCL_CAMERA_COLL_RADIUS,RCL_UNITS_PER_SQUARE); int16_t xSquare2 = RCL_divRoundDown(camera->position.x + RCL_CAMERA_COLL_RADIUS,RCL_UNITS_PER_SQUARE); int16_t ySquare1 = RCL_divRoundDown(camera->position.y - RCL_CAMERA_COLL_RADIUS,RCL_UNITS_PER_SQUARE); int16_t ySquare2 = RCL_divRoundDown(camera->position.y + RCL_CAMERA_COLL_RADIUS,RCL_UNITS_PER_SQUARE); RCL_Unit bottomLimit = floorHeightFunc(xSquare1,ySquare1); RCL_Unit topLimit = ceilingHeightFunc != 0 ? ceilingHeightFunc(xSquare1,ySquare1) : RCL_INFINITY; RCL_Unit height; #define checkSquares(s1,s2)\ {\ height = floorHeightFunc(xSquare##s1,ySquare##s2);\ bottomLimit = RCL_max(bottomLimit,height);\ height = ceilingHeightFunc != 0 ?\ ceilingHeightFunc(xSquare##s1,ySquare##s2) : RCL_INFINITY;\ topLimit = RCL_min(topLimit,height);\ } if (xSquare2 != xSquare1) checkSquares(2,1) if (ySquare2 != ySquare1) checkSquares(1,2) if (xSquare2 != xSquare1 && ySquare2 != ySquare1) checkSquares(2,2) camera->height = RCL_clamp(camera->height, bottomLimit + RCL_CAMERA_COLL_HEIGHT_BELOW, topLimit - RCL_CAMERA_COLL_HEIGHT_ABOVE); #undef checkSquares } } void RCL_initCamera(RCL_Camera *camera) { camera->position.x = 0; camera->position.y = 0; camera->direction = 0; camera->resolution.x = 20; camera->resolution.y = 15; camera->shear = 0; camera->height = RCL_UNITS_PER_SQUARE; } void RCL_initRayConstraints(RCL_RayConstraints *constraints) { constraints->maxHits = 1; constraints->maxSteps = 20; } #endif