small3dlib/small3dlib.h

#ifndef S3L_H
#define S3L_H

/*
  WIP

  Simple realtime 3D software rasterization renderer. It is fast, focused on
  resource-limited computers, located in a single C header file, with no
  dependencies, using only integer arithmetics.

  author: Miloslav Ciz
  license: CC0 1.0 + additional waiver of all IP

  --------------------

  This work's goal is to never be encumbered by any exclusive intellectual
  property rights. The work is therefore provided under CC0 1.0 + additional
  WAIVER OF ALL INTELLECTUAL PROPERTY RIGHTS that waives the rest of
  intellectual property rights not already waived by CC0 1.0. The WAIVER OF ALL
  INTELLECTUAL PROPERTY RGHTS is as follows:

  Each contributor to this work agrees that they waive any exclusive rights,
  including but not limited to copyright, patents, trademark, trade dress,
  industrial design, plant varieties and trade secrets, to any and all ideas,
  concepts, processes, discoveries, improvements and inventions conceived,
  discovered, made, designed, researched or developed by the contributor either
  solely or jointly with others, which relate to this work or result from this
  work. Should any waiver of such right be judged legally invalid or
  ineffective under applicable law, the contributor hereby grants to each
  affected person a royalty-free, non transferable, non sublicensable, non
  exclusive, irrevocable and unconditional license to this right.

  --------------------

  CONVENTIONS:

  This library should never draw pixels outside the specified screen
  coordinates, so you don't have to check this!

  Angles are in S3L_Units, a full angle (2 pi) is S3L_FRACTIONS_PER_UNITs.

  We use row vectors.

  In 3D space, a left-handed coord. system is used. One spatial unit is split
  into S3L_FRACTIONS_PER_UNIT fractions (fixed point arithmetic).

     y ^
       |   _ 
       |   /| z
       |  /
       | /
  [0,0,0]-------> x

  Untransformed camera is placed at [0,0,0], looking forward along +z axis. The
  projection plane is centered at [0,0,0], stretrinch from
  -S3L_FRACTIONS_PER_UNIT to S3L_FRACTIONS_PER_UNIT horizontally (x),
  vertical size (y) depends on the camera aspect ratio. Camera FOV is defined
  by focal length.

           y ^
             |  _
             |  /| z
         ____|_/__
        |    |/   |
     -----[0,0,0]-|-----> x
        |____|____|
             |    
             |

  Rotations use Euler angles and are generally in the extinsic Euler angles in
  ZXY order (by Z, then by X, then by Y).

  Coordinates of pixels on screen start typically at the top left, from [0,0].

  There is NO subpixel accuracy (screen coordinates are only integer).

  Triangle rasterization rules are these (mostly same as OpenGL, D3D etc.):

  - Let's define:
    - left side:
      - not exactly horizontal, and on the left side of triangle
      - exactly horizontal and above the topmost
      (in other words: its normal points at least a little to the left or
       completely up)
    - right side: not left side
  - Pixel centers are at integer coordinates and triangle for drawing are
    specified with integer coordinates of pixel centers.
  - A pixel is rasterized:
    - if its center is inside the triangle OR
    - if its center is exactly on the triangle side which is left and at the
      same time is not on the side that's right (case of a triangle that's on
      a single line) OR
    - if its center is exactly on the triangle corner of sides neither of which
      is right.

  These rules imply among others:

  - Adjacent triangles don't have any overlapping pixels, nor gaps between.
  - Triangles of points that lie on a single line are NOT rasterized.
  - A single "long" triangle CAN be rasterized as non-continuous.
  - Transforming (e.g. mirroring, rotating by 90 degrees etc.) a result of
    rasterizing triangle A is NOT generally equal to applying the same
    transformation to triangle A first and then rasterizing it. Even the number
    of rasterized pixels is usually different.
  - If specifying a triangle with integer coordinates, then:
    - The bottom-most corner (or side) of a triangle is never rasterized
      (because it is connected to a right side).
    - The top-most corner can only be rasterized on completely horizontal side
      (otherwise it is connected to a right side).
    - Vertically middle corner is rasterized if and only if it is on the left
      of the triangle and at the same time is also not the bottom-most corner.
*/

#include <stdint.h>

/* === PRESETS ===
   These can be used to quickly set a predefined library behavior. */

// TODO

// ---------------

#ifndef S3L_RESOLUTION_X
#define S3L_RESOLUTION_X 640 ///< Redefine to your screen x resolution.
#endif

#ifndef S3L_RESOLUTION_Y
#define S3L_RESOLUTION_Y 480 ///< Redefine to your screen y resolution.
#endif

#ifndef S3L_STRICT_NEAR_CULLING
#define S3L_STRICT_NEAR_CULLING 1 /**< If on, any triangle that only partially
                                  intersects the near plane will be culled.
                                  This can prevent errorneous rendering and 
                                  artifacts, but also makes triangles close to
                                  the camera disappear. */
#endif

#ifndef S3L_FLAT
#define S3L_FLAT 0           /**< If on, disables computation of per-pixel
                                  values such as barycentric coordinates and
                                  depth -- these will still be available but
                                  will be the same for the whole triangle. This
                                  can be used to create flat-shaded renders and
                                  will be a lot faster. With this option on you
                                  will probably want to use sorting instead of
                                  z-buffer. */
#endif

#if S3L_FLAT
  #define S3L_COMPUTE_DEPTH 0
  #define S3L_PERSPECTIVE_CORRECTION 0
  #define S3L_Z_BUFFER 0
#endif

#ifndef S3L_PERSPECTIVE_CORRECTION
#define S3L_PERSPECTIVE_CORRECTION 0 /**< Specifies what type of perspective
                        correction (PC) to use. Remember this is an expensive
                        operation! Possible values:
 
                        - 0 No perspective correction. Fastest, ugly.
                        - 1 Per-pixel perspective correction, nice but very
                            expensive.
                        - 2 Partial perspecive correction by subdividing
                            triangles. */
#endif

#if S3L_PERSPECTIVE_CORRECTION
#define S3L_COMPUTE_DEPTH 1  // PC inevitably computes depth, so enable it
#endif

#ifndef S3L_COMPUTE_DEPTH
#define S3L_COMPUTE_DEPTH 1  /**< Whether to compute depth for each pixel
                                  (fragment). Some other options may turn this
                                  on. */
#endif

typedef int32_t S3L_Unit;    /**< Units of measurement in 3D space. There is
                                  S3L_FRACTIONS_PER_UNIT in one spatial unit.
                                  By dividing the unit into fractions we
                                  effectively achieve fixed point arithmetic.
                                  The number of fractions is a constant that
                                  serves as 1.0 in floating point arithmetic
                                  (normalization etc.). */

#define S3L_FRACTIONS_PER_UNIT 512 /**< How many fractions a spatial unit is
                                  split into. WARNING: if setting higher than
                                  1024, you'll probably have to modify a sin
                                  table otherwise it will overflow. Also other
                                  things may overflow, so rather don't do
                                  it. */
typedef int16_t S3L_ScreenCoord;
typedef uint16_t S3L_Index;

#ifndef S3L_Z_BUFFER
#define S3L_Z_BUFFER 0  /**< What type of z-buffer (depth buffer) to use
                        for visibility determination. possible values:

                        - 0 Don't use z-buffer. This saves a lot of memory, but
                            visibility checking won't be pixel-accurate and has
                            to mostly be done by other means (typically
                            sorting).
                        - 1 Use full z-buffer (of S3L_Units) for visibiltiy
                            determination. This is the most accurate option
                            (and also a fast one), but  requires a big amount
                            of memory.
                        - 2 Use reduced-size z-buffer (of bytes). This is fast
                            and somewhat accurate, but inaccuracies can occur
                            and a considerable amount of memory is needed. */
#endif

#ifndef S3L_STENCIL_BUFFER
#define S3L_STENCIL_BUFFER 0 /**< Whether to use stencil buffer for drawing --
                                  with this pixels that have already been
                                  rasterized will be discarded. This is mostly
                                  for front-to-back sorted drawing. */
#endif

#ifndef S3L_SORT
#define S3L_SORT 0 /**< Defines how to sort triangles before
                        drawing a frame. This can be used to solve visibility
                        in case z-buffer is not used, to prevent overwrting
                        already rasterized pixels, implement transparency etc.
                        Note that for simplicity and performance a relatively
                        simple sorting is used which doesn't work completely
                        correctly, so mistakes can occur (even the best sorting
                        wouldn't be able to solve e.g. intersecting triangles).
                        Possible values:

                        - 0 Don't sort triangles. This is fastest.
                        - 1 Sort triangles from back to front. This can in most
                            cases solve visibility without requiring almost any
                            extra memory compared to z-buffer.
                        - 2 Sort triangles from front to back. This can be
                            faster than back to front, because we prevent
                            computing pixels that will be overwritten by nearer
                            ones, but we need a 1b stencil buffer for this
                            (enable S3L_STENCIL_BUFFER), so a bit more memory
                            is needed. */
#endif

#ifndef S3L_MAX_TRIANGES_DRAWN
#define S3L_MAX_TRIANGES_DRAWN 128 /**< Maximum number of triangles that can be
                                  drawn in sorted modes. This affects the size
                                  of a cache used for triangle sorting. */
#endif

#ifndef S3L_NEAR
#define S3L_NEAR (S3L_FRACTIONS_PER_UNIT / 4) /**< Distance of the near
                                  clipping plane. Points in front or EXATLY ON
                                  this plane are considered outside the
                                  frustum. This must be >= 0. */
#endif

#if S3L_NEAR <= 0
#define S3L_NEAR 1              // Can't be <= 0.
#endif

#ifndef S3L_FAST_LERP_QUALITY
#define S3L_FAST_LERP_QUALITY 8 /**< Quality (scaling) of SOME linear
                                  interpolations. 0 will most likely be faster,
                                  but artifacts can occur for bigger tris,
                                  while higher values can fix this -- in
                                  theory all higher values will have the same
                                  speed (it is a shift value), but it mustn't
                                  be too high to prevent overflow. */
#endif

#define S3L_HALF_RESOLUTION_X (S3L_RESOLUTION_X >> 1)
#define S3L_HALF_RESOLUTION_Y (S3L_RESOLUTION_Y >> 1)

#define S3L_PROJECTION_PLANE_HEIGHT\
  ((S3L_RESOLUTION_Y * S3L_FRACTIONS_PER_UNIT * 2) / S3L_RESOLUTION_X)

/** Predefined vertices of a cube to simply insert in an array. These come with
    S3L_CUBE_TRIANGLES and S3L_CUBE_TEXCOORDS. */
#define S3L_CUBE_VERTICES\
 /* 0 front, bottom, right */\
 S3L_FRACTIONS_PER_UNIT/2,-S3L_FRACTIONS_PER_UNIT/2,-S3L_FRACTIONS_PER_UNIT/2,\
 /* 1 front, bottom, left */\
-S3L_FRACTIONS_PER_UNIT/2,-S3L_FRACTIONS_PER_UNIT/2,-S3L_FRACTIONS_PER_UNIT/2,\
 /* 2 front, top,    right */\
 S3L_FRACTIONS_PER_UNIT/2,S3L_FRACTIONS_PER_UNIT/2,-S3L_FRACTIONS_PER_UNIT/2,\
 /* 3 front, top,    left */\
-S3L_FRACTIONS_PER_UNIT/2,S3L_FRACTIONS_PER_UNIT/2,-S3L_FRACTIONS_PER_UNIT/2,\
 /* 4 back,  bottom, right */\
 S3L_FRACTIONS_PER_UNIT/2,-S3L_FRACTIONS_PER_UNIT/2,S3L_FRACTIONS_PER_UNIT/2,\
 /* 5 back,  bottom, left */\
-S3L_FRACTIONS_PER_UNIT/2,-S3L_FRACTIONS_PER_UNIT/2,S3L_FRACTIONS_PER_UNIT/2,\
 /* 6 back,  top,    right */\
 S3L_FRACTIONS_PER_UNIT/2,S3L_FRACTIONS_PER_UNIT/2,S3L_FRACTIONS_PER_UNIT/2,\
 /* 7 back,  top,    left */\
-S3L_FRACTIONS_PER_UNIT/2,S3L_FRACTIONS_PER_UNIT/2,S3L_FRACTIONS_PER_UNIT/2

#define S3L_CUBE_VERTEX_COUNT 8

/** Predefined triangle indices of a cube, to be used with S3L_CUBE_VERTICES
    and S3L_CUBE_TEXCOORDS. */
#define S3L_CUBE_TRIANGLES\
  0, 3, 2, /* front  */\
  0, 1, 3,\
  4, 0, 2, /* right  */\
  4, 2, 6,\
  5, 4, 6, /* back   */\
  6, 7, 5,\
  7, 3, 1, /* left   */\
  7, 1, 5,\
  3, 6, 2, /* top    */\
  3, 7, 6,\
  4, 1, 0, /* bottom */\
  4, 5, 1

#define S3L_CUBE_TRIANGLE_COUNT 12

/** Predefined texture coordinates of a cube, corresponding to triangles (NOT
    vertices), to be used with S3L_CUBE_VERTICES and S3L_CUBE_TRIANGLES. */
#define S3L_CUBE_TEXCOORDS(m)\
  m,m,  0,0,  m,0,\
  m,m,  0,m,  0,0,\
  m,0,  m,m,  0,m,\
  m,0,  0,m,  0,0,\
  0,0,  m,0,  m,m,\
  m,m,  0,m,  0,0,\
  0,m,  0,0,  m,0,\
  0,m,  m,0,  m,m,\
  m,m,  0,0,  m,0,\
  m,m,  0,m,  0,0,\
  0,m,  m,0,  m,m,\
  0,m,  0,0,  m,0

/** Vector that consists of four scalars and can represent homogenous
  coordinates, but is generally also used as Vec3 and Vec2. */
typedef struct
{
  S3L_Unit x;
  S3L_Unit y;
  S3L_Unit z;
  S3L_Unit w;
} S3L_Vec4;

static inline void S3L_initVec4(S3L_Vec4 *v);

static inline void S3L_vec3Add(S3L_Vec4 *result, S3L_Vec4 added);
static inline void S3L_vec3Sub(S3L_Vec4 *result, S3L_Vec4 substracted);

#define S3L_writeVec4(v)\
  printf("Vec4: %d %d %d %d\n",((v).x),((v).y),((v).z),((v).w))

typedef struct
{
  S3L_Vec4 translation;
  S3L_Vec4 rotation; /**< Euler angles. Rortation is applied in this order:
                          1. z = by z (roll) CW looking along z+
                          2. x = by x (pitch) CW looking along x+
                          3. y = by y (yaw) CW looking along y+ */
  S3L_Vec4 scale;
} S3L_Transform3D;

#define S3L_writeTransform3D(t)\
  printf("Transform3D: T = [%d %d %d], R = [%d %d %d], S = [%d %d %d]\n",\
    (t).translation.x,(t).translation.y,(t).translation.z,\
    (t).rotation.x,(t).rotation.y,(t).rotation.z,\
    (t).scale.x,(t).scale.y,(t).scale.z)

static inline void S3L_initTransoform3D(S3L_Transform3D *t);

void S3L_setTransform3D(
  S3L_Unit tx,
  S3L_Unit ty,
  S3L_Unit tz,
  S3L_Unit rx,
  S3L_Unit ry,
  S3L_Unit rz,
  S3L_Unit sx,
  S3L_Unit sy,
  S3L_Unit sz,
  S3L_Transform3D *t);

/** Converts rotation transformation to three direction vectors of given length
  (any one can be NULL, in which case it won't be computed). */
void S3L_rotationToDirections(
  S3L_Vec4 rotation,
  S3L_Unit length,
  S3L_Vec4 *forw, 
  S3L_Vec4 *right,
  S3L_Vec4 *up);

typedef S3L_Unit S3L_Mat4[4][4]; /**< 4x4 matrix, used mostly for 3D
                                      transforms. The indexing is this:
                                      matrix[column][row]. */
#define S3L_writeMat4(m)\
  printf("Mat4:\n  %d %d %d %d\n  %d %d %d %d\n  %d %d %d %d\n  %d %d %d %d\n"\
   ,(m)[0][0],(m)[1][0],(m)[2][0],(m)[3][0],\
    (m)[0][1],(m)[1][1],(m)[2][1],(m)[3][1],\
    (m)[0][2],(m)[1][2],(m)[2][2],(m)[3][2],\
    (m)[0][3],(m)[1][3],(m)[2][3],(m)[3][3])

/** Initializes a 4x4 matrix to identity. */
static inline void S3L_initMat4(S3L_Mat4 *m);

void S3L_transposeMat4(S3L_Mat4 *m);

void S3L_makeTranslationMat(
  S3L_Unit offsetX,
  S3L_Unit offsetY,
  S3L_Unit offsetZ,
  S3L_Mat4 *m);

/** Makes a scaling matrix. DON'T FORGET: scale of 1.0 is set with
  S3L_FRACTIONS_PER_UNIT! */
void S3L_makeScaleMatrix(
  S3L_Unit scaleX,
  S3L_Unit scaleY,
  S3L_Unit scaleZ,
  S3L_Mat4 *m);

/** Makes a matrixfor rotation in the ZXY order. */
void S3L_makeRotationMatrixZXY(
  S3L_Unit byX,
  S3L_Unit byY,
  S3L_Unit byZ,
  S3L_Mat4 *m);

void S3L_makeWorldMatrix(S3L_Transform3D worldTransform, S3L_Mat4 *m);
void S3L_makeCameraMatrix(S3L_Transform3D cameraTransform, S3L_Mat4 *m);

/** Multiplies a vector by a matrix with normalization by
  S3L_FRACTIONS_PER_UNIT. Result is stored in the input vector. */
void S3L_vec4Xmat4(S3L_Vec4 *v, S3L_Mat4 *m);

/** Same as S3L_vec4Xmat4 but faster, because this version doesn't compute the
  W component of the result, which is usually not needed. */
void S3L_vec3Xmat4(S3L_Vec4 *v, S3L_Mat4 *m);

/** Multiplies two matrices with normalization by S3L_FRACTIONS_PER_UNIT.
  Result is stored in the first matrix. The result represents a transformation
  that has the same effect as applying the transformation represented by m1 and
  then m2 (in that order). */
void S3L_mat4Xmat4(S3L_Mat4 *m1, S3L_Mat4 *m2);

typedef struct
{
  S3L_Unit focalLength;       ///< Defines the field of view (FOV).
  S3L_Transform3D transform;
} S3L_Camera;

static inline void S3L_initCamera(S3L_Camera *c);

typedef struct
{
  uint8_t backfaceCulling;    /**< What backface culling to use. Possible
                                   values:
                                   - 0 none
                                   - 1 clock-wise
                                   - 2 counter clock-wise */
} S3L_DrawConfig;

void S3L_initDrawConfig(S3L_DrawConfig *config);

typedef struct
{
  const S3L_Unit *vertices;
  S3L_Index vertexCount;
  const S3L_Index *triangles;
  S3L_Index triangleCount;
  S3L_Transform3D transform;
  S3L_DrawConfig config;
} S3L_Model3D;                ///< Represents a 3D model.

typedef struct
{
  S3L_Model3D *models;
  S3L_Index modelCount;
  S3L_Camera camera;
} S3L_Scene;                  ///< Represent the 3D scene to be rendered.

typedef struct
{
  S3L_ScreenCoord x;          ///< Screen X coordinate.
  S3L_ScreenCoord y;          ///< Screen Y coordinate.

  S3L_Unit barycentric[3]; /**< Barycentric coords corresponds to the three
                              vertices. These serve to locate the pixel on a
                              triangle and interpolate values between it's
                              three points. The sum of the three coordinates
                              will always be exactly S3L_FRACTIONS_PER_UNIT. */
  S3L_Index triangleIndex;  ///< Triangle index.
  S3L_Index modelIndex;
  S3L_Unit depth;        ///< Depth (only if depth is turned on).
  S3L_ScreenCoord triangleSize[2]; /**< Rasterized triangle width and height,
                              can be used e.g. for MIP mapping. */
} S3L_PixelInfo;         /**< Used to pass the info about a rasterized pixel
                              (fragment) to the user-defined drawing func. */

static inline void S3L_initPixelInfo(S3L_PixelInfo *p);

// general helper functions
static inline S3L_Unit S3L_abs(S3L_Unit value);
static inline S3L_Unit S3L_min(S3L_Unit v1, S3L_Unit v2);
static inline S3L_Unit S3L_max(S3L_Unit v1, S3L_Unit v2);
static inline S3L_Unit S3L_wrap(S3L_Unit value, S3L_Unit mod);
static inline S3L_Unit S3L_nonZero(S3L_Unit value);

S3L_Unit S3L_sin(S3L_Unit x);
static inline S3L_Unit S3L_cos(S3L_Unit x);

/** Interpolated between two values, v1 and v2, in the same ratio as t is to
  tMax. Does NOT prevent zero division. */
static inline S3L_Unit S3L_interpolate(
  S3L_Unit v1,
  S3L_Unit v2,
  S3L_Unit t,
  S3L_Unit tMax);

/** Same as S3L_interpolate but with v1 == 0. Should be faster. */
static inline S3L_Unit S3L_interpolateFrom0(
  S3L_Unit v2,
  S3L_Unit t,
  S3L_Unit tMax);

/** Like S3L_interpolate, but uses a parameter that goes from 0 to
  S3L_FRACTIONS_PER_UNIT - 1, which can be faster. */
static inline S3L_Unit S3L_interpolateByUnit(
  S3L_Unit v1,
  S3L_Unit v2,
  S3L_Unit t);

/** Same as S3L_interpolateByUnit but with v1 == 0. Should be faster. */
static inline S3L_Unit S3L_interpolateByUnitFrom0(
  S3L_Unit v2,
  S3L_Unit t);

/** Returns a value interpolated between the three triangle vertices based on
  barycentric coordinates. */
static inline S3L_Unit S3L_interpolateBarycentric(
  S3L_Unit value0,
  S3L_Unit value1,
  S3L_Unit value2,
  S3L_Unit barycentric0,
  S3L_Unit barycentric1,
  S3L_Unit barycentric2);

static inline void S3L_mapProjectionPlaneToScreen(
  S3L_Vec4 point,
  S3L_ScreenCoord *screenX,
  S3L_ScreenCoord *screenY);

/** Draws a triangle according to given config. The vertices are specified in
  projection-plane space (NOT screen space!) -- they wll be mapped to screen
  space by thies function. If perspective correction is enabled, each vertex
  has to have a depth (Z position in camera space) specified in the Z
  component. */
void S3L_drawTriangle(
  S3L_Vec4 point0,
  S3L_Vec4 point1,
  S3L_Vec4 point2,
  const S3L_DrawConfig *config,
  const S3L_Camera *camera,
  S3L_Index modelIndex,
  S3L_Index triangleIndex);

/** This should be called before rendering each frame. The function clears
  buffers and does potentially other things needed for the frame. */
void S3L_newFrame();

void S3L_zBufferClear();
void S3L_stencilBufferClear();

static inline void S3L_rotate2DPoint(S3L_Unit *x, S3L_Unit *y, S3L_Unit angle);

//=============================================================================
// privates

#if S3L_Z_BUFFER == 1
  #define S3L_COMPUTE_DEPTH 1
  #define S3L_MAX_DEPTH 2147483647
  S3L_Unit S3L_zBuffer[S3L_RESOLUTION_X * S3L_RESOLUTION_Y];
  #define S3L_zBufferFormat(depth) (depth)
#elif S3L_Z_BUFFER == 2
  #define S3L_COMPUTE_DEPTH 1
  #define S3L_MAX_DEPTH 255
  uint8_t S3L_zBuffer[S3L_RESOLUTION_X * S3L_RESOLUTION_Y];
  #define S3L_zBufferFormat(depth) (((depth) >> 5) & 0x000000FF)
#endif

#if S3L_Z_BUFFER
static inline int8_t S3L_zTest(
  S3L_ScreenCoord x,
  S3L_ScreenCoord y,
  S3L_Unit depth)
{
  uint32_t index = y * S3L_RESOLUTION_X + x;

  depth = S3L_zBufferFormat(depth);

  if (depth < S3L_zBuffer[index])
  {
    S3L_zBuffer[index] = depth;
    return 1;
  }

  return 0;
}
#endif

#if S3L_STENCIL_BUFFER
  #define S3L_STENCIL_BUFFER_SIZE\
    ((S3L_RESOLUTION_X * S3L_RESOLUTION_Y - 1) / 8 + 1)
  uint8_t S3L_stencilBuffer[S3L_STENCIL_BUFFER_SIZE];

static inline int8_t S3L_stencilTest(
  S3L_ScreenCoord x,
  S3L_ScreenCoord y)
{
  uint32_t index = y * S3L_RESOLUTION_X + x;
  uint32_t bit = (index & 0x00000007);
  index = index >> 3;

  uint8_t val = S3L_stencilBuffer[index];

  if ((val >> bit) & 0x1)
    return 0;
  
  S3L_stencilBuffer[index] = val | (0x1 << bit);

  return 1;
}
#endif

#define S3L_COMPUTE_LERP_DEPTH\
  (S3L_COMPUTE_DEPTH && (S3L_PERSPECTIVE_CORRECTION != 1))

#define S3L_SIN_TABLE_LENGTH 128
static const S3L_Unit S3L_sinTable[S3L_SIN_TABLE_LENGTH] =
{
  /* 511 was chosen here as a highest number that doesn't overflow during
     compilation for S3L_FRACTIONS_PER_UNIT == 1024 */

  (0*S3L_FRACTIONS_PER_UNIT)/511, (6*S3L_FRACTIONS_PER_UNIT)/511, 
  (12*S3L_FRACTIONS_PER_UNIT)/511, (18*S3L_FRACTIONS_PER_UNIT)/511, 
  (25*S3L_FRACTIONS_PER_UNIT)/511, (31*S3L_FRACTIONS_PER_UNIT)/511, 
  (37*S3L_FRACTIONS_PER_UNIT)/511, (43*S3L_FRACTIONS_PER_UNIT)/511, 
  (50*S3L_FRACTIONS_PER_UNIT)/511, (56*S3L_FRACTIONS_PER_UNIT)/511, 
  (62*S3L_FRACTIONS_PER_UNIT)/511, (68*S3L_FRACTIONS_PER_UNIT)/511, 
  (74*S3L_FRACTIONS_PER_UNIT)/511, (81*S3L_FRACTIONS_PER_UNIT)/511, 
  (87*S3L_FRACTIONS_PER_UNIT)/511, (93*S3L_FRACTIONS_PER_UNIT)/511, 
  (99*S3L_FRACTIONS_PER_UNIT)/511, (105*S3L_FRACTIONS_PER_UNIT)/511, 
  (111*S3L_FRACTIONS_PER_UNIT)/511, (118*S3L_FRACTIONS_PER_UNIT)/511, 
  (124*S3L_FRACTIONS_PER_UNIT)/511, (130*S3L_FRACTIONS_PER_UNIT)/511, 
  (136*S3L_FRACTIONS_PER_UNIT)/511, (142*S3L_FRACTIONS_PER_UNIT)/511, 
  (148*S3L_FRACTIONS_PER_UNIT)/511, (154*S3L_FRACTIONS_PER_UNIT)/511, 
  (160*S3L_FRACTIONS_PER_UNIT)/511, (166*S3L_FRACTIONS_PER_UNIT)/511, 
  (172*S3L_FRACTIONS_PER_UNIT)/511, (178*S3L_FRACTIONS_PER_UNIT)/511, 
  (183*S3L_FRACTIONS_PER_UNIT)/511, (189*S3L_FRACTIONS_PER_UNIT)/511, 
  (195*S3L_FRACTIONS_PER_UNIT)/511, (201*S3L_FRACTIONS_PER_UNIT)/511, 
  (207*S3L_FRACTIONS_PER_UNIT)/511, (212*S3L_FRACTIONS_PER_UNIT)/511, 
  (218*S3L_FRACTIONS_PER_UNIT)/511, (224*S3L_FRACTIONS_PER_UNIT)/511, 
  (229*S3L_FRACTIONS_PER_UNIT)/511, (235*S3L_FRACTIONS_PER_UNIT)/511, 
  (240*S3L_FRACTIONS_PER_UNIT)/511, (246*S3L_FRACTIONS_PER_UNIT)/511, 
  (251*S3L_FRACTIONS_PER_UNIT)/511, (257*S3L_FRACTIONS_PER_UNIT)/511, 
  (262*S3L_FRACTIONS_PER_UNIT)/511, (268*S3L_FRACTIONS_PER_UNIT)/511, 
  (273*S3L_FRACTIONS_PER_UNIT)/511, (278*S3L_FRACTIONS_PER_UNIT)/511, 
  (283*S3L_FRACTIONS_PER_UNIT)/511, (289*S3L_FRACTIONS_PER_UNIT)/511, 
  (294*S3L_FRACTIONS_PER_UNIT)/511, (299*S3L_FRACTIONS_PER_UNIT)/511, 
  (304*S3L_FRACTIONS_PER_UNIT)/511, (309*S3L_FRACTIONS_PER_UNIT)/511, 
  (314*S3L_FRACTIONS_PER_UNIT)/511, (319*S3L_FRACTIONS_PER_UNIT)/511, 
  (324*S3L_FRACTIONS_PER_UNIT)/511, (328*S3L_FRACTIONS_PER_UNIT)/511, 
  (333*S3L_FRACTIONS_PER_UNIT)/511, (338*S3L_FRACTIONS_PER_UNIT)/511, 
  (343*S3L_FRACTIONS_PER_UNIT)/511, (347*S3L_FRACTIONS_PER_UNIT)/511, 
  (352*S3L_FRACTIONS_PER_UNIT)/511, (356*S3L_FRACTIONS_PER_UNIT)/511, 
  (361*S3L_FRACTIONS_PER_UNIT)/511, (365*S3L_FRACTIONS_PER_UNIT)/511, 
  (370*S3L_FRACTIONS_PER_UNIT)/511, (374*S3L_FRACTIONS_PER_UNIT)/511, 
  (378*S3L_FRACTIONS_PER_UNIT)/511, (382*S3L_FRACTIONS_PER_UNIT)/511, 
  (386*S3L_FRACTIONS_PER_UNIT)/511, (391*S3L_FRACTIONS_PER_UNIT)/511, 
  (395*S3L_FRACTIONS_PER_UNIT)/511, (398*S3L_FRACTIONS_PER_UNIT)/511, 
  (402*S3L_FRACTIONS_PER_UNIT)/511, (406*S3L_FRACTIONS_PER_UNIT)/511, 
  (410*S3L_FRACTIONS_PER_UNIT)/511, (414*S3L_FRACTIONS_PER_UNIT)/511, 
  (417*S3L_FRACTIONS_PER_UNIT)/511, (421*S3L_FRACTIONS_PER_UNIT)/511, 
  (424*S3L_FRACTIONS_PER_UNIT)/511, (428*S3L_FRACTIONS_PER_UNIT)/511, 
  (431*S3L_FRACTIONS_PER_UNIT)/511, (435*S3L_FRACTIONS_PER_UNIT)/511, 
  (438*S3L_FRACTIONS_PER_UNIT)/511, (441*S3L_FRACTIONS_PER_UNIT)/511, 
  (444*S3L_FRACTIONS_PER_UNIT)/511, (447*S3L_FRACTIONS_PER_UNIT)/511, 
  (450*S3L_FRACTIONS_PER_UNIT)/511, (453*S3L_FRACTIONS_PER_UNIT)/511, 
  (456*S3L_FRACTIONS_PER_UNIT)/511, (459*S3L_FRACTIONS_PER_UNIT)/511, 
  (461*S3L_FRACTIONS_PER_UNIT)/511, (464*S3L_FRACTIONS_PER_UNIT)/511, 
  (467*S3L_FRACTIONS_PER_UNIT)/511, (469*S3L_FRACTIONS_PER_UNIT)/511, 
  (472*S3L_FRACTIONS_PER_UNIT)/511, (474*S3L_FRACTIONS_PER_UNIT)/511, 
  (476*S3L_FRACTIONS_PER_UNIT)/511, (478*S3L_FRACTIONS_PER_UNIT)/511, 
  (481*S3L_FRACTIONS_PER_UNIT)/511, (483*S3L_FRACTIONS_PER_UNIT)/511, 
  (485*S3L_FRACTIONS_PER_UNIT)/511, (487*S3L_FRACTIONS_PER_UNIT)/511, 
  (488*S3L_FRACTIONS_PER_UNIT)/511, (490*S3L_FRACTIONS_PER_UNIT)/511, 
  (492*S3L_FRACTIONS_PER_UNIT)/511, (494*S3L_FRACTIONS_PER_UNIT)/511, 
  (495*S3L_FRACTIONS_PER_UNIT)/511, (497*S3L_FRACTIONS_PER_UNIT)/511, 
  (498*S3L_FRACTIONS_PER_UNIT)/511, (499*S3L_FRACTIONS_PER_UNIT)/511, 
  (501*S3L_FRACTIONS_PER_UNIT)/511, (502*S3L_FRACTIONS_PER_UNIT)/511, 
  (503*S3L_FRACTIONS_PER_UNIT)/511, (504*S3L_FRACTIONS_PER_UNIT)/511, 
  (505*S3L_FRACTIONS_PER_UNIT)/511, (506*S3L_FRACTIONS_PER_UNIT)/511, 
  (507*S3L_FRACTIONS_PER_UNIT)/511, (507*S3L_FRACTIONS_PER_UNIT)/511, 
  (508*S3L_FRACTIONS_PER_UNIT)/511, (509*S3L_FRACTIONS_PER_UNIT)/511, 
  (509*S3L_FRACTIONS_PER_UNIT)/511, (510*S3L_FRACTIONS_PER_UNIT)/511, 
  (510*S3L_FRACTIONS_PER_UNIT)/511, (510*S3L_FRACTIONS_PER_UNIT)/511, 
  (510*S3L_FRACTIONS_PER_UNIT)/511, (510*S3L_FRACTIONS_PER_UNIT)/511
};

#define S3L_SIN_TABLE_UNIT_STEP\
  (S3L_FRACTIONS_PER_UNIT / (S3L_SIN_TABLE_LENGTH * 4))

void S3L_initVec4(S3L_Vec4 *v)
{
  v->x = 0; v->y = 0; v->z = 0; v->w = S3L_FRACTIONS_PER_UNIT;
}

void S3L_vec3Add(S3L_Vec4 *result, S3L_Vec4 added)
{
  result->x += added.x;
  result->y += added.y;
  result->z += added.z;
}

void S3L_vec3Sub(S3L_Vec4 *result, S3L_Vec4 substracted)
{
  result->x -= substracted.x;
  result->y -= substracted.y;
  result->z -= substracted.z;
}

void S3L_initMat4(S3L_Mat4 *m)
{
  #define M(x,y) (*m)[x][y]
  #define S S3L_FRACTIONS_PER_UNIT

  M(0,0) = S; M(1,0) = 0; M(2,0) = 0; M(3,0) = 0; 
  M(0,1) = 0; M(1,1) = S; M(2,1) = 0; M(3,1) = 0; 
  M(0,2) = 0; M(1,2) = 0; M(2,2) = S; M(3,2) = 0; 
  M(0,3) = 0; M(1,3) = 0; M(2,3) = 0; M(3,3) = S; 

  #undef M
  #undef S
}

void S3L_vec4Xmat4(S3L_Vec4 *v, S3L_Mat4 *m)
{
  S3L_Vec4 vBackup;

  vBackup.x = v->x;  
  vBackup.y = v->y;  
  vBackup.z = v->z;  
  vBackup.w = v->w;  

  // TODO: try alternative operation orders to optimize

  #define dotCol(col)\
    (vBackup.x * (*m)[col][0]) / S3L_FRACTIONS_PER_UNIT +\
    (vBackup.y * (*m)[col][1]) / S3L_FRACTIONS_PER_UNIT +\
    (vBackup.z * (*m)[col][2]) / S3L_FRACTIONS_PER_UNIT +\
    (vBackup.w * (*m)[col][3]) / S3L_FRACTIONS_PER_UNIT

  v->x = dotCol(0);
  v->y = dotCol(1);
  v->z = dotCol(2);
  v->w = dotCol(3);
}

void S3L_vec3Xmat4(S3L_Vec4 *v, S3L_Mat4 *m)
{
  S3L_Vec4 vBackup;

  #undef dotCol
  #define dotCol(col)\
    (vBackup.x * (*m)[col][0]) / S3L_FRACTIONS_PER_UNIT +\
    (vBackup.y * (*m)[col][1]) / S3L_FRACTIONS_PER_UNIT +\
    (vBackup.z * (*m)[col][2]) / S3L_FRACTIONS_PER_UNIT +\
    (*m)[col][3]

  vBackup.x = v->x;  
  vBackup.y = v->y;  
  vBackup.z = v->z;  
  vBackup.w = v->w;  

  v->x = dotCol(0);
  v->y = dotCol(1);
  v->z = dotCol(2);
  v->w = S3L_FRACTIONS_PER_UNIT;
}

#undef dotCol

S3L_Unit S3L_abs(S3L_Unit value)
{
  return value >= 0 ? value : -1 * value;
}

S3L_Unit S3L_min(S3L_Unit v1, S3L_Unit v2)
{
  return v1 >= v2 ? v2 : v1;
}

S3L_Unit S3L_max(S3L_Unit v1, S3L_Unit v2)
{
  return v1 >= v2 ? v1 : v2;
}

S3L_Unit S3L_wrap(S3L_Unit value, S3L_Unit mod)
{
  return value >= 0 ? (value % mod) : (mod + (value % mod) - 1);
}

S3L_Unit S3L_nonZero(S3L_Unit value)
{
  return value != 0 ? value : 1;
}

S3L_Unit S3L_interpolate(S3L_Unit v1, S3L_Unit v2, S3L_Unit t, S3L_Unit tMax)
{
  return v1 + ((v2 - v1) * t) / tMax;
}

S3L_Unit S3L_interpolateByUnit(S3L_Unit v1, S3L_Unit v2, S3L_Unit t)
{
  return v1 + ((v2 - v1) * t) / S3L_FRACTIONS_PER_UNIT;
}

S3L_Unit S3L_interpolateByUnitFrom0(S3L_Unit v2, S3L_Unit t)
{
  return (v2 * t) / S3L_FRACTIONS_PER_UNIT;
}

S3L_Unit S3L_interpolateFrom0(S3L_Unit v2, S3L_Unit t, S3L_Unit tMax)
{
  return (v2 * t) / tMax;
}

void S3L_mat4Xmat4(S3L_Mat4 *m1, S3L_Mat4 *m2)
{
  S3L_Mat4 mat1;

  for (uint16_t row = 0; row < 4; ++row)
    for (uint16_t col = 0; col < 4; ++col)
      mat1[col][row] = (*m1)[col][row];

  for (uint16_t row = 0; row < 4; ++row)
    for (uint16_t col = 0; col < 4; ++col)
    {
      (*m1)[col][row] = 0;

      for (uint16_t i = 0; i < 4; ++i)
        (*m1)[col][row] +=
          (mat1[i][row] * (*m2)[col][i]) / S3L_FRACTIONS_PER_UNIT;
    }
}

S3L_Unit S3L_sin(S3L_Unit x)
{
  x = S3L_wrap(x / S3L_SIN_TABLE_UNIT_STEP,S3L_SIN_TABLE_LENGTH * 4);
  int8_t positive = 1;

  if (x < S3L_SIN_TABLE_LENGTH)
    x = x;
  else if (x < S3L_SIN_TABLE_LENGTH * 2)
    x = S3L_SIN_TABLE_LENGTH * 2 - x - 1;
  else if (x < S3L_SIN_TABLE_LENGTH * 3)
  {
    x = x - S3L_SIN_TABLE_LENGTH * 2;
    positive = 0;
  }
  else
  {
    x = S3L_SIN_TABLE_LENGTH - (x - S3L_SIN_TABLE_LENGTH * 3) - 1;
    positive = 0;
  }

  return positive ? S3L_sinTable[x] : -1 * S3L_sinTable[x];
}

S3L_Unit S3L_cos(S3L_Unit x)
{
  return S3L_sin(x - S3L_FRACTIONS_PER_UNIT / 4);
}

void S3L_makeTranslationMat(
  S3L_Unit offsetX,
  S3L_Unit offsetY,
  S3L_Unit offsetZ,
  S3L_Mat4 *m)
{
  #define M(x,y) (*m)[x][y]
  #define S S3L_FRACTIONS_PER_UNIT

  M(0,0) = S; M(1,0) = 0; M(2,0) = 0; M(3,0) = 0; 
  M(0,1) = 0; M(1,1) = S; M(2,1) = 0; M(3,1) = 0; 
  M(0,2) = 0; M(1,2) = 0; M(2,2) = S; M(3,2) = 0; 
  M(0,3) = offsetX; M(1,3) = offsetY; M(2,3) = offsetZ; M(3,3) = S;

  #undef M
  #undef S
}

void S3L_makeScaleMatrix(
  S3L_Unit scaleX,
  S3L_Unit scaleY,
  S3L_Unit scaleZ,
  S3L_Mat4 *m)
{
  #define M(x,y) (*m)[x][y]

  M(0,0) = scaleX; M(1,0) = 0;      M(2,0) = 0;     M(3,0) = 0; 
  M(0,1) = 0;      M(1,1) = scaleY; M(2,1) = 0; M(3,1) = 0; 
  M(0,2) = 0;      M(1,2) = 0;      M(2,2) = scaleZ; M(3,2) = 0; 
  M(0,3) = 0;      M(1,3) = 0;     M(2,3) = 0; M(3,3) = S3L_FRACTIONS_PER_UNIT; 

  #undef M
}

void S3L_makeRotationMatrixZXY(
  S3L_Unit byX,
  S3L_Unit byY,
  S3L_Unit byZ,
  S3L_Mat4 *m)
{
  S3L_Unit sx = S3L_sin(byX);
  S3L_Unit sy = S3L_sin(byY);
  S3L_Unit sz = S3L_sin(byZ);

  S3L_Unit cx = S3L_cos(byX);
  S3L_Unit cy = S3L_cos(byY);
  S3L_Unit cz = S3L_cos(byZ);

  #define M(x,y) (*m)[x][y]
  #define S S3L_FRACTIONS_PER_UNIT

  M(0,0) = (cy * cz) / S + (sy * sx * sz) / (S * S);
  M(1,0) = (cx * sz) / S;
  M(2,0) = (cy * sx * sz) / (S * S) - (cz * sy) / S;
  M(3,0) = 0;

  M(0,1) = (cz * sy * sx) / (S * S) - (cy * sz) / S;
  M(1,1) = (cx * cz) / S;
  M(2,1) = (cy * cz * sx) / (S * S) + (sy * sz) / S;
  M(3,1) = 0;

  M(0,2) = (cx * sy) / S;
  M(1,2) = -1 * sx;
  M(2,2) = (cy * cx) / S;
  M(3,2) = 0;

  M(0,3) = 0;
  M(1,3) = 0;
  M(2,3) = 0;
  M(3,3) = S3L_FRACTIONS_PER_UNIT;

  #undef M
  #undef S 
}

void S3L_initTransoform3D(S3L_Transform3D *t)
{
  S3L_initVec4(&(t->translation));
  S3L_initVec4(&(t->rotation));
  t->scale.x = S3L_FRACTIONS_PER_UNIT;
  t->scale.y = S3L_FRACTIONS_PER_UNIT;
  t->scale.z = S3L_FRACTIONS_PER_UNIT;
}

void S3L_setTransform3D(
  S3L_Unit tx,
  S3L_Unit ty,
  S3L_Unit tz,
  S3L_Unit rx,
  S3L_Unit ry,
  S3L_Unit rz,
  S3L_Unit sx,
  S3L_Unit sy,
  S3L_Unit sz,
  S3L_Transform3D *t)
{
  t->translation.x = tx;
  t->translation.y = ty;
  t->translation.z = tz;

  t->rotation.x = rx;
  t->rotation.y = ry;
  t->rotation.z = rz;

  t->scale.x = sx;
  t->scale.y = sy;
  t->scale.z = sz;
}

void S3L_initCamera(S3L_Camera *c)
{
  c->focalLength = S3L_FRACTIONS_PER_UNIT;
  S3L_initTransoform3D(&(c->transform));
}

void S3L_rotationToDirections(
  S3L_Vec4 rotation,
  S3L_Unit length,
  S3L_Vec4 *forw, 
  S3L_Vec4 *right,
  S3L_Vec4 *up)
{
  S3L_Mat4 m;

  S3L_makeRotationMatrixZXY(-1 * rotation.x,-1 * rotation.y,-1 * rotation.z,&m);

  if (forw != 0)
  {
    forw->x = 0;
    forw->y = 0;
    forw->z = length;
    S3L_vec3Xmat4(forw,&m);
  }

  if (right != 0)
  {
    right->x = length;
    right->y = 0;
    right->z = 0;
    S3L_vec3Xmat4(right,&m);
  }

  if (up != 0)
  {
    up->x = 0;
    up->y = length;
    up->z = 0;
    S3L_vec3Xmat4(up,&m);
  }
}

void S3L_initPixelInfo(S3L_PixelInfo *p) // TODO: maybe non-pointer for p
{                                        // could be faster?
  p->x = 0;
  p->y = 0;
  p->barycentric[0] = S3L_FRACTIONS_PER_UNIT;
  p->barycentric[1] = 0;
  p->barycentric[2] = 0;
  p->triangleIndex = 0;
  p->depth = 0;
}

void S3L_initDrawConfig(S3L_DrawConfig *config)
{
  config->backfaceCulling = 1;
}

static inline void S3L_PIXEL_FUNCTION(S3L_PixelInfo *pixel); // forward decl

typedef struct
{
  int16_t steps;
  int16_t err;
  S3L_ScreenCoord x;
  S3L_ScreenCoord y;

  int16_t *majorCoord;
  int16_t *minorCoord;
  int16_t majorIncrement;
  int16_t minorIncrement;
  int16_t majorDiff;
  int16_t minorDiff; 
} S3L_BresenhamState; ///< State of drawing a line with Bresenham algorithm.

typedef struct
{
  S3L_Unit valueScaled;
  S3L_Unit stepScaled;
} S3L_FastLerpState;

#define S3L_getFastLerpValue(state)\
  (state.valueScaled >> S3L_FAST_LERP_QUALITY)

#define S3L_stepFastLerp(state)\
  state.valueScaled += state.stepScaled

static inline S3L_Unit S3L_interpolateBarycentric(
  S3L_Unit value0,
  S3L_Unit value1,
  S3L_Unit value2,
  S3L_Unit barycentric0,
  S3L_Unit barycentric1,
  S3L_Unit barycentric2)
{
  return
    (
      (value0 * barycentric0) +
      (value1 * barycentric1) +
      (value2 * barycentric2)
    ) / S3L_FRACTIONS_PER_UNIT;
}

void S3L_bresenhamInit(S3L_BresenhamState *state, int16_t x0, int16_t y0,
  int16_t x1, int16_t y1)
{
  int16_t dx = x1 - x0;
  int16_t dy = y1 - y0;

  int16_t absDx = S3L_abs(dx);
  int16_t absDy = S3L_abs(dy);

  if (absDx >= absDy)
  {
    state->majorCoord = &(state->x);
    state->minorCoord = &(state->y);

    state->minorDiff = 2 * absDy;
    state->majorDiff = 2 * absDx;
    state->err = 2 * dy - dx;
  
    state->majorIncrement = dx >= 0 ? 1 : -1;
    state->minorIncrement = dy >= 0 ? 1 : -1;

    state->steps = absDx;
  }
  else
  {
    state->majorCoord = &(state->y);
    state->minorCoord = &(state->x);

    state->minorDiff = 2 * absDx;
    state->majorDiff = 2 * absDy;
    state->err = 2 * dx - dy;

    state->majorIncrement = dy >= 0 ? 1 : -1;
    state->minorIncrement = dx >= 0 ? 1 : -1;

    state->steps = absDy;
  }

  state->x = x0;
  state->y = y0;
}

int S3L_bresenhamStep(S3L_BresenhamState *state)
{
  state->steps--;

  (*state->majorCoord) += state->majorIncrement;

  if (state->err > 0)
  {
    (*state->minorCoord) += state->minorIncrement;
    state->err -= state->majorDiff;
  }

  state->err += state->minorDiff;

  return state->steps >= 0;
}

void S3L_mapProjectionPlaneToScreen(
  S3L_Vec4 point,
  S3L_ScreenCoord *screenX,
  S3L_ScreenCoord *screenY)
{
  *screenX = 
    S3L_HALF_RESOLUTION_X +
    (point.x * S3L_HALF_RESOLUTION_X) / S3L_FRACTIONS_PER_UNIT;

  *screenY = 
    S3L_HALF_RESOLUTION_Y -
    (point.y * S3L_HALF_RESOLUTION_X) / S3L_FRACTIONS_PER_UNIT;
}

void S3L_zBufferClear()
{
#if S3L_Z_BUFFER
  for (uint32_t i = 0; i < S3L_RESOLUTION_X * S3L_RESOLUTION_Y; ++i)
    S3L_zBuffer[i] = S3L_MAX_DEPTH;
#endif
}

void S3L_stencilBufferClear()
{
#if S3L_STENCIL_BUFFER
  for (uint32_t i = 0; i < S3L_STENCIL_BUFFER_SIZE; ++i)
    S3L_stencilBuffer[i] = 0;
#endif
}

void S3L_newFrame()
{
  S3L_zBufferClear();
  S3L_stencilBufferClear();
}

void S3L_drawTriangle(
  S3L_Vec4 point0,
  S3L_Vec4 point1,
  S3L_Vec4 point2,
  const S3L_DrawConfig *config,
  const S3L_Camera *camera,
  S3L_Index modelIndex,
  S3L_Index triangleIndex)
{
  S3L_PixelInfo p;
  S3L_initPixelInfo(&p);
  p.modelIndex = modelIndex;
  p.triangleIndex = triangleIndex;

#if !S3L_STRICT_NEAR_CULLING
  point0.z = point0.z >= S3L_NEAR ? point0.z : S3L_NEAR;
  point1.z = point1.z >= S3L_NEAR ? point1.z : S3L_NEAR;
  point2.z = point2.z >= S3L_NEAR ? point2.z : S3L_NEAR;
#endif

  S3L_Vec4 *tPointPP, *lPointPP, *rPointPP; /* points in projction plane space
                                               (in Units, normalized by
                                               S3L_FRACTIONS_PER_UNIT) */

  S3L_ScreenCoord x0, y0, x1, y1, x2, y2;   /* points in screen space (pixel
                                               coordinates) */

  S3L_mapProjectionPlaneToScreen(point0,&x0,&y0);
  S3L_mapProjectionPlaneToScreen(point1,&x1,&y1);
  S3L_mapProjectionPlaneToScreen(point2,&x2,&y2);

  S3L_ScreenCoord
    tPointSx, tPointSy,   // top point coords, in screen space
    lPointSx, lPointSy,   // left point coords, in screen space
    rPointSx, rPointSy;   // right point coords, in screen space

  S3L_Unit *barycentric0; // bar. coord that gets higher from L to R
  S3L_Unit *barycentric1; // bar. coord that gets higher from R to L
  S3L_Unit *barycentric2; // bar. coord that gets higher from bottom up

  // sort the points:

  #define assignPoints(t,a,b)\
    {\
      tPointSx = x##t;\
      tPointSy = y##t;\
      tPointPP = &point##t;\
      barycentric2 = &(p.barycentric[t]);\
      int32_t aDx = x##a - x##t;\
      int32_t bDx = x##b - x##t;\
      int32_t aDy = S3L_nonZero(y##a - y##t);\
      int32_t bDy = S3L_nonZero(y##b - y##t);\
      if ((aDx << 8) / aDy < (bDx << 8) / bDy)\
      {\
        lPointSx = x##a; lPointSy = y##a;\
        rPointSx = x##b; rPointSy = y##b;\
        lPointPP = &point##a; rPointPP = &point##b;\
        barycentric0 = &(p.barycentric[b]);\
        barycentric1 = &(p.barycentric[a]);\
      }\
      else\
      {\
        lPointSx = x##b; lPointSy = y##b;\
        rPointSx = x##a; rPointSy = y##a;\
        lPointPP = &point##b; rPointPP = &point##a;\
        barycentric0 = &(p.barycentric[a]);\
        barycentric1 = &(p.barycentric[b]);\
      }\
    }

  if (y0 <= y1)
  {
    if (y0 <= y2)
      assignPoints(0,1,2)
    else
      assignPoints(2,0,1)
  }
  else
  {
    if (y1 <= y2)
      assignPoints(1,0,2)
    else
      assignPoints(2,0,1)
  }

  #undef assignPoints

#if S3L_FLAT
  p.depth = (tPointPP->z + lPointPP->z + rPointPP->z) / 3;
  *barycentric0 = S3L_FRACTIONS_PER_UNIT / 3;
  *barycentric1 = S3L_FRACTIONS_PER_UNIT / 3;
  *barycentric2 = S3L_FRACTIONS_PER_UNIT - 2 * (S3L_FRACTIONS_PER_UNIT / 3);
#endif

  p.triangleSize[0] = rPointSx - lPointSx;
  p.triangleSize[1] = (rPointSy > lPointSy ? rPointSy : lPointSy) - tPointSy;

  // now draw the triangle line by line:

  S3L_ScreenCoord splitY; // Y of the vertically middle point of the triangle
  S3L_ScreenCoord endY;   // bottom Y of the whole triangle
  int splitOnLeft;        /* whether splitY is the y coord. of left or right 
                             point */

  if (rPointSy <= lPointSy)
  {
    splitY = rPointSy;
    splitOnLeft = 0;
    endY = lPointSy;
  }
  else
  {
    splitY = lPointSy;
    splitOnLeft = 1;
    endY = rPointSy;
  }

  S3L_ScreenCoord currentY = tPointSy;

  /* We'll be using an algorithm similar to Bresenham line algorithm. The
     specifics of this algorithm are among others:

     - drawing possibly a NON-CONTINUOUS line
     - NOT tracing the line exactly, but rather rasterizing one the right
       side of it, according to the pixel CENTERS, INCLUDING the pixel
       centers
     
     The principle is this:

     - Move vertically by pixels and accumulate the error (abs(dx/dy)).
     - If the error is greater than one (crossed the next pixel center), keep
       moving horizontally and substracting 1 from the error until it is less
       than 1 again.
     - To make this INTEGER ONLY, scale the case so that distance between
       pixels is equal to dy (instead of 1). This way the error becomes
       dx/dy * dy == dx, and we're comparing the error to (and potentially
       substracting) 1 * dy == dy. */

  int16_t
    /* triangle side:
    left     right */
    lX,      rX,       // current x position on the screen
    lDx,     rDx,      // dx (end point - start point)
    lDy,     rDy,      // dy (end point - start point)
    lInc,    rInc,     // direction in which to increment (1 or -1)
    lErr,    rErr,     // current error (Bresenham)
    lErrCmp, rErrCmp,  // helper for deciding comparison (> vs >=)
    lErrAdd, rErrAdd,  // error value to add in each Bresenham cycle
    lErrSub, rErrSub;  // error value to substract when moving in x direction

  S3L_FastLerpState lSideFLS, rSideFLS;

#if S3L_COMPUTE_LERP_DEPTH
  S3L_FastLerpState lDepthFLS, rDepthFLS;

  #define initDepthFLS(s,p1,p2)\
    s##DepthFLS.valueScaled = p1##PointPP->z << S3L_FAST_LERP_QUALITY;\
    s##DepthFLS.stepScaled = ((p2##PointPP->z << S3L_FAST_LERP_QUALITY) -\
      s##DepthFLS.valueScaled) / (s##Dy != 0 ? s##Dy : 1); 
#else
  #define initDepthFLS(s,p1,p2) ;
#endif

  /* init side for the algorithm, params:
     s - which side (l or r)
     p1 - point from (t, l or r)
     p2 - point to (t, l or r)
     down - whether the side coordinate goes top-down or vice versa */
  #define initSide(s,p1,p2,down)\
    s##X = p1##PointSx;\
    s##Dx = p2##PointSx - p1##PointSx;\
    s##Dy = p2##PointSy - p1##PointSy;\
    initDepthFLS(s,p1,p2)\
    s##SideFLS.stepScaled = (S3L_FRACTIONS_PER_UNIT << S3L_FAST_LERP_QUALITY)\
                      / (s##Dy != 0 ? s##Dy : 1);\
    s##SideFLS.valueScaled = 0;\
    if (!down)\
    {\
      s##SideFLS.valueScaled = S3L_FRACTIONS_PER_UNIT << S3L_FAST_LERP_QUALITY;\
      s##SideFLS.stepScaled *= -1;\
    }\
    s##Inc = s##Dx >= 0 ? 1 : -1;\
    if (s##Dx < 0)\
      {s##Err = 0;     s##ErrCmp = 0;}\
    else\
      {s##Err = s##Dy; s##ErrCmp = 1;}\
    s##ErrAdd = S3L_abs(s##Dx);\
    s##ErrSub = s##Dy != 0 ? s##Dy : 1; /* don't allow 0, could lead to an
                                           infinite substracting loop */

  #define stepSide(s)\
    while (s##Err - s##Dy >= s##ErrCmp)\
    {\
      s##X += s##Inc;\
      s##Err -= s##ErrSub;\
    }\
    s##Err += s##ErrAdd;

  initSide(r,t,r,1)
  initSide(l,t,l,1)

#if S3L_PERSPECTIVE_CORRECTION == 1
  /* PC is done by linearly interpolating reciprocals from which the corrected
     velues can be computed. See
     http://www.lysator.liu.se/~mikaelk/doc/perspectivetexture/ */

  S3L_Unit
    tPointRecipZ, lPointRecipZ, rPointRecipZ, /* Reciprocals of the depth of 
                                                 each triangle point. */
    lRecip0, lRecip1, rRecip0, rRecip1;       /* Helper variables for swapping
                                                 the above after split. */

  tPointRecipZ = (S3L_FRACTIONS_PER_UNIT * S3L_FRACTIONS_PER_UNIT)
    / S3L_nonZero(tPointPP->z);

  lPointRecipZ = (S3L_FRACTIONS_PER_UNIT * S3L_FRACTIONS_PER_UNIT)
    / S3L_nonZero(lPointPP->z);

  rPointRecipZ = (S3L_FRACTIONS_PER_UNIT * S3L_FRACTIONS_PER_UNIT)
    / S3L_nonZero(rPointPP->z);

  lRecip0 = tPointRecipZ;
  lRecip1 = lPointRecipZ;
  rRecip0 = tPointRecipZ;
  rRecip1 = rPointRecipZ;

  #define manageSplitPerspective(b0,b1)\
    b1##Recip0 = b0##PointRecipZ;\
    b1##Recip1 = b1##PointRecipZ;\
    b0##Recip0 = b0##PointRecipZ;\
    b0##Recip1 = tPointRecipZ;
#else
  #define manageSplitPerspective(b0,b1) ;
#endif

  // clip to the screen in y dimension:

  endY = S3L_min(endY,S3L_RESOLUTION_Y);

  /* Clipping above the screen (y < 0) can't be easily done here, will be
     handled inside the loop. */

  while (currentY < endY)   /* draw the triangle from top to bottom -- the
                               bottom-most row is left out because, following
                               from the rasterization rules (see top of the
                               source), it is to never be rasterized. */
  {
    if (currentY == splitY) // reached a vertical split of the triangle?
    {
      #define manageSplit(b0,b1,s0,s1)\
        S3L_Unit *tmp = barycentric##b0;\
        barycentric##b0 = barycentric##b1;\
        barycentric##b1 = tmp;\
        s0##SideFLS.valueScaled = (S3L_FRACTIONS_PER_UNIT\
           << S3L_FAST_LERP_QUALITY) - s0##SideFLS.valueScaled;\
        s0##SideFLS.stepScaled *= -1;\
        manageSplitPerspective(s0,s1)

      if (splitOnLeft)
      {
        initSide(l,l,r,0);
        manageSplit(0,2,r,l)
      }
      else
      {
        initSide(r,r,l,0);
        manageSplit(1,2,l,r)
      }
    }

    stepSide(r)
    stepSide(l)

    if (currentY >= 0) /* clipping of pixels whose y < 0 (can't be easily done
                          outside the loop) */
    {                     /* TODO: ^ This is bad though, a single large
                             triangle outside he top of the screen will trigger
                             a long loop. Try to FIX THIS! */
      p.y = currentY;

      // draw the horizontal line

#if !S3L_FLAT
      S3L_Unit rowLength = S3L_nonZero(rX - lX - 1); // prevent zero div

  #if S3L_PERSPECTIVE_CORRECTION == 1
      S3L_Unit lOverZ, lRecipZ, rOverZ, rRecipZ, lT, rT;

      lT = S3L_getFastLerpValue(lSideFLS);
      rT = S3L_getFastLerpValue(rSideFLS);

      lOverZ  = S3L_interpolateByUnitFrom0(lRecip1,lT);
      lRecipZ = S3L_interpolateByUnit(lRecip0,lRecip1,lT);

      rOverZ  = S3L_interpolateByUnitFrom0(rRecip1,rT);
      rRecipZ = S3L_interpolateByUnit(rRecip0,rRecip1,rT);
  #else
      S3L_FastLerpState b0FLS, b1FLS;

    #if S3L_COMPUTE_LERP_DEPTH
      S3L_FastLerpState  depthFLS;

      depthFLS.valueScaled = lDepthFLS.valueScaled;
      depthFLS.stepScaled =
        (rDepthFLS.valueScaled - lDepthFLS.valueScaled) / rowLength;
    #endif

      b0FLS.valueScaled = 0;
      b1FLS.valueScaled = lSideFLS.valueScaled;

      b0FLS.stepScaled = rSideFLS.valueScaled / rowLength;
      b1FLS.stepScaled = -1 * lSideFLS.valueScaled / rowLength;
  #endif
#endif

      // clip to the screen in x dimension:

      S3L_ScreenCoord rXClipped = S3L_min(rX,S3L_RESOLUTION_X),
                      lXClipped = lX;

      if (lXClipped < 0)
      {
        lXClipped = 0;

#if S3L_PERSPECTIVE_CORRECTION != 1 && !S3L_FLAT
        b0FLS.valueScaled -= lX * b0FLS.stepScaled;
        b1FLS.valueScaled -= lX * b1FLS.stepScaled;

  #if S3L_COMPUTE_LERP_DEPTH
        depthFLS.valueScaled -= lX * depthFLS.stepScaled;
  #endif
#endif
      }

#if S3L_PERSPECTIVE_CORRECTION == 1
      S3L_ScreenCoord i = lXClipped - lX - 1;  /* helper var to save one
                                                  substraction in the inner
                                                  loop */
#endif

      // draw the row -- inner loop:

      for (S3L_ScreenCoord x = lXClipped; x < rXClipped; ++x)
      {
#if S3L_PERSPECTIVE_CORRECTION == 1
        ++i; /* Has to be done here, because the following tests can skip the
                the rest of the loop. */
#endif

#if S3L_STENCIL_BUFFER
        if (!S3L_stencilTest(x,p.y))
          continue;
#endif
        p.x = x;

#if S3L_COMPUTE_DEPTH
  #if S3L_PERSPECTIVE_CORRECTION == 1
        p.depth = (S3L_FRACTIONS_PER_UNIT * S3L_FRACTIONS_PER_UNIT) /
          S3L_nonZero(S3L_interpolate(lRecipZ,rRecipZ,x - lX,rX - lX));
  #else
        p.depth = S3L_getFastLerpValue(depthFLS);
        S3L_stepFastLerp(depthFLS);
  #endif
#endif

#if S3L_Z_BUFFER
        if (!S3L_zTest(p.x,p.y,p.depth))
          continue;
#endif

#if !S3L_FLAT
  #if S3L_PERSPECTIVE_CORRECTION == 1
        *barycentric0 =
         ( 
           S3L_interpolateFrom0(rOverZ,i,rowLength)
           * p.depth
         ) / S3L_FRACTIONS_PER_UNIT;

        *barycentric1 =
         ( 
           (lOverZ - S3L_interpolateFrom0(lOverZ,i,rowLength))
           * p.depth
         ) / S3L_FRACTIONS_PER_UNIT;
  #else
        *barycentric0 = S3L_getFastLerpValue(b0FLS);
        *barycentric1 = S3L_getFastLerpValue(b1FLS);

        S3L_stepFastLerp(b0FLS);
        S3L_stepFastLerp(b1FLS);
  #endif

        *barycentric2 = S3L_FRACTIONS_PER_UNIT - *barycentric0 - *barycentric1;
#endif

        S3L_PIXEL_FUNCTION(&p);
      }
    }   // y clipping

    S3L_stepFastLerp(lSideFLS);
    S3L_stepFastLerp(rSideFLS);

#if S3L_COMPUTE_LERP_DEPTH
    S3L_stepFastLerp(lDepthFLS);
    S3L_stepFastLerp(rDepthFLS);
#endif

    ++currentY;
  }

  #undef manageSplit
  #undef initPC
  #undef initSide
  #undef stepSide 
}

void S3L_rotate2DPoint(S3L_Unit *x, S3L_Unit *y, S3L_Unit angle)
{
  if (angle < S3L_SIN_TABLE_UNIT_STEP)
    return; // no visible rotation

  S3L_Unit angleSin = S3L_sin(angle);
  S3L_Unit angleCos = S3L_cos(angle);

  S3L_Unit xBackup = *x;

  *x =
    (angleCos * (*x)) / S3L_FRACTIONS_PER_UNIT -
    (angleSin * (*y)) / S3L_FRACTIONS_PER_UNIT;

  *y =
    (angleSin * xBackup) / S3L_FRACTIONS_PER_UNIT +
    (angleCos * (*y)) / S3L_FRACTIONS_PER_UNIT;
}

void S3L_makeWorldMatrix(S3L_Transform3D worldTransform, S3L_Mat4 *m)
{
  S3L_makeScaleMatrix(
    worldTransform.scale.x,
    worldTransform.scale.y,
    worldTransform.scale.z,
    m
  );

  S3L_Mat4 t;

  S3L_makeRotationMatrixZXY(
    worldTransform.rotation.x,
    worldTransform.rotation.y,
    worldTransform.rotation.z,
    &t);

  S3L_mat4Xmat4(m,&t);

  S3L_makeTranslationMat(
    worldTransform.translation.x,
    worldTransform.translation.y,
    worldTransform.translation.z,
    &t);

  S3L_mat4Xmat4(m,&t);
}

void S3L_transposeMat4(S3L_Mat4 *m)
{
  S3L_Unit tmp;

  for (uint8_t y = 0; y < 3; ++y)
    for (uint8_t x = 1 + y; x < 4; ++x)
    {
      tmp = (*m)[x][y];
      (*m)[x][y] = (*m)[y][x];
      (*m)[y][x] = tmp;
    }
}

void S3L_makeCameraMatrix(S3L_Transform3D cameraTransform, S3L_Mat4 *m)
{
  S3L_makeTranslationMat(
    -1 * cameraTransform.translation.x,
    -1 * cameraTransform.translation.y,
    -1 * cameraTransform.translation.z,
    m);

  S3L_Mat4 r;

  S3L_makeRotationMatrixZXY(
    -1 * cameraTransform.rotation.x,
    -1 * cameraTransform.rotation.y,
    -1 * cameraTransform.rotation.z,
    &r);

  S3L_transposeMat4(&r); // transposing creates an inverse transform

  S3L_mat4Xmat4(m,&r);
}

/**
  Performs perspecive division (z-divide). Does NOT check for division by zero.
*/
static inline void S3L_perspectiveDivide(S3L_Vec4 *vector,
  S3L_Unit focalLength)
{
  vector->x = (vector->x * focalLength) / vector->z;
  vector->y = (vector->y * focalLength) / vector->z;
}

/**
  Checks if given triangle (in Projection Plane space) is at least partially
  visible, i.e. returns false if the triangle is either completely outside
  the frustum (left, right, top, bottom, near) or is invisible due to
  backface culling.
*/
static inline int8_t S3L_triangleIsVisible(
  S3L_Vec4 p0,
  S3L_Vec4 p1,
  S3L_Vec4 p2,
  uint8_t backfaceCulling)
{
  #define clipTest(c,cmp,v)\
    (p0.c cmp (v) && p1.c cmp (v) && p2.c cmp (v))

  if ( // outside frustum?

#if S3L_STRICT_NEAR_CULLING
      p0.z <= S3L_NEAR || p1.z <= S3L_NEAR || p2.z <= S3L_NEAR ||
      // ^ partially in front of NEAR?
#else
      clipTest(z,<=,S3L_NEAR) || // completely in front of NEAR?
#endif
      clipTest(x,<,-1 * S3L_FRACTIONS_PER_UNIT) ||
      clipTest(x,>,S3L_FRACTIONS_PER_UNIT) ||
      clipTest(y,<,-1 * S3L_PROJECTION_PLANE_HEIGHT / 2) ||
      clipTest(y,>,S3L_PROJECTION_PLANE_HEIGHT / 2)
    )
    return 0;

  #undef clipTest

  if (backfaceCulling != 0)
  {
    int32_t winding = // determines CW or CCW
      (p1.y - p0.y) * (p2.x - p1.x) - (p1.x - p0.x) * (p2.y - p1.y); 

    if ((backfaceCulling == 1 && winding < 0) ||
        (backfaceCulling == 2 && winding >= 0))
      return 0;
  }

  return 1;
}

#if S3L_SORT != 0
typedef struct
{
  uint8_t modelIndex;
  S3L_Index triangleIndex;
  uint16_t sortValue;
} S3L_TriangleToSort;

S3L_TriangleToSort S3L_sortArray[S3L_MAX_TRIANGES_DRAWN];
uint16_t S3L_sortArrayLength;
#endif

void _S3L_projectVertex(
  const S3L_Model3D *model,
  S3L_Index triangleIndex,
  uint8_t vertex,
  S3L_Mat4 *projectionMatrix, 
  S3L_Vec4 *result,
  S3L_Unit focalLength)
{
  S3L_Index vertexIndex = model->triangles[triangleIndex * 3 + vertex] * 3;

  result->x = model->vertices[vertexIndex];
  result->y = model->vertices[vertexIndex + 1];
  result->z = model->vertices[vertexIndex + 2];
  result->w = S3L_FRACTIONS_PER_UNIT; // for translation 
 
  S3L_vec3Xmat4(result,projectionMatrix);
 
  result->z = result->z >= S3L_NEAR ? result->z : S3L_NEAR;
  /* ^ This firstly prevents zero division in the follwoing z-divide and
    secondly "pushes" vertices that are in front of near a little bit forward,
    which makes the behave a bit better. If all three vertices end up exactly
    on NEAR, the triangle will be culled. */ 

  S3L_perspectiveDivide(result,focalLength);
}

void S3L_drawScene(S3L_Scene scene)
{
  S3L_Mat4 matFinal, matCamera;
  S3L_Vec4 transformed0, transformed1, transformed2;
  const S3L_Model3D *model;
  S3L_Index modelIndex, triangleIndex;

  S3L_makeCameraMatrix(scene.camera.transform,&matCamera);

#if S3L_SORT != 0
  uint16_t previousModel = 0;
  S3L_sortArrayLength = 0;
#endif

  for (modelIndex = 0; modelIndex < scene.modelCount; ++modelIndex)
  {
#if S3L_SORT != 0
    if (S3L_sortArrayLength >= S3L_MAX_TRIANGES_DRAWN)
      break;

    previousModel = modelIndex;
#endif

    S3L_makeWorldMatrix(scene.models[modelIndex].transform,&matFinal);
    S3L_mat4Xmat4(&matFinal,&matCamera);

    S3L_Index triangleCount = scene.models[modelIndex].triangleCount;

    triangleIndex = 0;
    
    while (triangleIndex < triangleCount)
    {
      model = &(scene.models[modelIndex]);

      /* TODO: maybe create an option that would use a cache here to not
               transform the same point twice? */

      _S3L_projectVertex(model,triangleIndex,0,&matFinal,
        &transformed0,scene.camera.focalLength);

      _S3L_projectVertex(model,triangleIndex,1,&matFinal,
        &transformed1,scene.camera.focalLength);

      _S3L_projectVertex(model,triangleIndex,2,&matFinal,
        &transformed2,scene.camera.focalLength);

      if (S3L_triangleIsVisible(transformed0,transformed1,transformed2,
         model->config.backfaceCulling))
      {
#if S3L_SORT == 0
        // without sorting draw right away
        S3L_drawTriangle(transformed0,transformed1,transformed2,
          &(model->config),&(scene.camera),modelIndex,triangleIndex);
#else
        if (S3L_sortArrayLength >= S3L_MAX_TRIANGES_DRAWN)
          break;

        // with sorting add to a sort list
        S3L_sortArray[S3L_sortArrayLength].modelIndex = modelIndex;
        S3L_sortArray[S3L_sortArrayLength].triangleIndex = triangleIndex;
        S3L_sortArray[S3L_sortArrayLength].sortValue = 
          (transformed0.z + transformed1.z + transformed2.z) >> 2;
        /* ^ As a simple approximation we sort by the triangle center point,
           which is a mean coordinate -- we don't actually have to divide by 3
           (or anything), that is unnecessary for sorting! We shift by 2 just
           as a fast operation to prevent overflow of the sum ver uint_16t. */

        S3L_sortArrayLength++;
#endif
      }

      triangleIndex++;
    }
  }

#if S3L_SORT != 0

  #if S3L_SORT == 1
    #define cmp <
  #else
    #define cmp >
  #endif

  /* Sort the triangles. We use insertion sort, because it has many advantages,
  especially for smaller arrays (better than bubble sort, in-place, stable,
  simple, ...). */

  for (int16_t i = 1; i < S3L_sortArrayLength; ++i)
  {
    S3L_TriangleToSort tmp = S3L_sortArray[i];
 
    int16_t j = i - 1;

    while (j >= 0 && S3L_sortArray[j].sortValue cmp tmp.sortValue)
    {
      S3L_sortArray[j + 1] = S3L_sortArray[j];
      j--;
    }

    S3L_sortArray[j + 1] = tmp;
  }

  #undef cmp

  for (S3L_Index i = 0; i < S3L_sortArrayLength; ++i)
  {
    modelIndex = S3L_sortArray[i].modelIndex;
    triangleIndex = S3L_sortArray[i].triangleIndex;

    model = &(scene.models[modelIndex]);

    if (modelIndex != previousModel)
    {
      // only recompute the matrix when the model has changed
      S3L_makeWorldMatrix(model->transform,&matFinal);
      S3L_mat4Xmat4(&matFinal,&matCamera);
      previousModel = modelIndex;
    }

    /* Here we project the points again, which is redundant and slow as they've
       already been projected above, but saving the projected points would
       require a lot of memory, which for small resolutions could be even
       worse than z-bufer. So this seems to be the best way memory-wise. */
    
    _S3L_projectVertex(model,triangleIndex,0,&matFinal,
      &transformed0,scene.camera.focalLength);

    _S3L_projectVertex(model,triangleIndex,1,&matFinal,
      &transformed1,scene.camera.focalLength);

    _S3L_projectVertex(model,triangleIndex,2,&matFinal,
      &transformed2,scene.camera.focalLength);

    S3L_drawTriangle(transformed0,transformed1,transformed2,
      &(model->config),&(scene.camera),modelIndex,triangleIndex);
  }
#endif
}

#endif